---
title: "Deck Materials List Calculator: Whole Deck | DeckTally"
description: "Free deck materials list: boards, joists, hangers, beam, posts, footings, concrete and screws for a whole deck from its length and width, with the working."
author: "Hassan Razeen"
datePublished: "2026-11-16"
dateModified: "2026-11-16"
image: "https://decktally.com/og.png"
url: "https://decktally.com/deck-materials-list/"
---

# Deck Materials List Calculator

A deck materials list is the decking, the frame under it, the beam and posts that carry the frame, and the footings under the posts. Enter the deck's length and width and this page counts all of them at once, each by the same published rule as the calculator for that part. A 16 × 12 ft deck fixed to the house takes 29 deck boards 16 ft long, 13 2 × 10 joists 12 ft long on 13 hangers, a ledger and a rim joist, a beam of two 2 × 10 or one 3 × 10 on 4 posts, 4 footings 21 in across and 8 in thick, and 676 deck screws.

## Your materials

Results update as you type.

Deck boards

29 boards

16 ft long

Joists

13 joists

2 × 10, 12 ft long

Posts and footings

4 of each

6 × 6 posts, 5 ft 4 in apart

### How it adds up

1.  Deck boards 29 boards
    
    12 ft ÷ (5.5 in board + 0.25 in gap) = 25.04, rounded up to 26 rows 26 rows × 16 ft + 10% waste = 457.6 ft ÷ 16 ft boards = 28.6, rounded up to 29 boards
    
2.  Joists 13 joists
    
    16 ft ÷ 16 in spacing = 12 spaces, plus one = 13 joists, each 12 ft long DCA 6 Table 2 allows a 2 × 10 Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir joist 13 ft 7 in at this spacing, so 12 ft is within it
    
3.  Posts and footings 4 of each
    
    The beam may span 5 ft 8 in between posts (DCA 6 Table 3A) 16 ft ÷ 5 ft 8 in, rounded up, = 3 spaces, so 4 posts, one footing under each Post length is the height of your deck, which this list does not know
    
4.  Beam Two 2 × 10 or one 3 × 10
    
    One beam under the outer ends of the joists, the length of the deck. Carrying 12 ft joists it may span 5 ft 8 in between posts.
    
5.  Ledger and rim joist 2 boards
    
    One ledger on the house and one rim joist across the outer ends of the joists, each the length of the deck. The ledger is at least a 2 × 8 and at least as deep as the joists.
    
6.  Joist hangers 13 hangers
    
    One for each of the 13 joists, where it meets the ledger. The joists sit on top of the beam at the other end.
    
7.  Footing size 21 in
    
    DCA 6 Table 4, 1,500 psf soil, for posts 5 ft 4 in apart under 12 ft joists: 21 in round or 18 × 18 in square, 8 in thick Stronger soil takes a smaller footing: the footing calculator has the other columns
    
8.  Concrete for footings 6.41 cu ft
    
    1.6 cu ft in each round footing pad × 4 = 6.41 cu ft. The pad only: a pier on top of it is extra.
    
9.  Deck screws 676 screws
    
    26 rows × 13 joists × 2 screws where a board crosses a joist = 676
    

**Estimates only.** Results come from the formulas listed below and use no outside data. Check local building codes and your supplier before buying.

These results are for the default sizes. Turn on JavaScript to update them as you type.

  

[**29** boards **13** joists **4** of each Results ↓](https://decktally.com/deck-materials-list/#results-heading) Embed this calculator on your site

Paste this where you want the calculator. It is free, shows no ads, works in any site, and links back to this page. Change the height to suit your layout.

Embed code <iframe src="https://decktally.com/embed/deck-materials-list/" height="1100" style="width:100%;border:0" loading="lazy" title="Deck Materials List Calculator by DeckTally"></iframe> 

## What do I need to enter?

1.  The deck's length along the house and its width out from the house, up to 18 ft wide.
2.  The decking: the actual board width, the gap, the board length you will buy and a waste allowance.
3.  The frame: joist spacing, joist size and lumber species.
4.  The beam build-up you plan to use.

## How is the materials list worked out?

Each line comes from the calculator for that part, so the list and the single calculators always agree.

-   **Deck boards and screws**: as the [deck lumber calculator](https://decktally.com/deck-material-calculator/) counts them, from the rows of boards across the width.
-   **Joists, hangers, ledger and rim joist**: as the [deck joist span calculator](https://decktally.com/deck-joist-calculator/) counts them for a deck on a ledger, with the span checked.
-   **Beam and posts**: the [deck beam span calculator](https://decktally.com/deck-beam-calculator/)'s allowable span for your beam, and the posts a beam the length of the deck needs.
-   **Footings and concrete**: the [deck footing calculator](https://decktally.com/deck-footing-calculator/)'s table entry for that post spacing and joist span.

### Assumptions

-   The deck is a rectangle fixed to the house by a ledger, with one beam under the outer ends of the joists and no overhang. The joists span the full width, so the width is limited to 18 ft, where the guide's beam and footing tables end. A freestanding deck, a second beam or a cantilever changes the list: use the separate calculators.
-   Joists are checked against DCA 6 Table 2 and the beam against Table 3A for the species you choose. The list tells you when a joist is too small for the span, but it does not pick sizes for you.
-   Footings are read from DCA 6 Table 4 at 1,500 psf, the weakest soil the guide covers, as round pads, and the concrete is the pads alone. Posts are 6 × 6 and are counted, not measured: their length is the height of your deck.
-   Left out: stairs, railing, the ledger's fasteners and flashing, post bases and caps, joist-hanger nails, blocking, bracing, stain and delivery. The stair, railing and stain calculators cover three of those.

## Worked example

A 16 × 12 ft deck fixed to the house, with the form's other defaults:

-   **Deck boards: 29 boards, 16 ft long** 12 ft ÷ (5.5 in board + 0.25 in gap) = 25.04, rounded up to 26 rows 26 rows × 16 ft + 10% waste = 457.6 ft ÷ 16 ft boards = 28.6, rounded up to 29 boards
-   **Joists: 13 joists, 2 × 10, 12 ft long** 16 ft ÷ 16 in spacing = 12 spaces, plus one = 13 joists, each 12 ft long DCA 6 Table 2 allows a 2 × 10 Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir joist 13 ft 7 in at this spacing, so 12 ft is within it
-   **Posts and footings: 4 of each, 6 × 6 posts, 5 ft 4 in apart** The beam may span 5 ft 8 in between posts (DCA 6 Table 3A) 16 ft ÷ 5 ft 8 in, rounded up, = 3 spaces, so 4 posts, one footing under each Post length is the height of your deck, which this list does not know
-   **Beam: Two 2 × 10 or one 3 × 10, 16 ft long** One beam under the outer ends of the joists, the length of the deck. Carrying 12 ft joists it may span 5 ft 8 in between posts.
-   **Ledger and rim joist: 2 boards, 16 ft long** One ledger on the house and one rim joist across the outer ends of the joists, each the length of the deck. The ledger is at least a 2 × 8 and at least as deep as the joists.
-   **Joist hangers: 13 hangers** One for each of the 13 joists, where it meets the ledger. The joists sit on top of the beam at the other end.
-   **Footing size: 21 in, round, 8 in thick** DCA 6 Table 4, 1,500 psf soil, for posts 5 ft 4 in apart under 12 ft joists: 21 in round or 18 × 18 in square, 8 in thick Stronger soil takes a smaller footing: the footing calculator has the other columns
-   **Concrete for footings: 6.41 cu ft** 1.6 cu ft in each round footing pad × 4 = 6.41 cu ft. The pad only: a pier on top of it is extra.
-   **Deck screws: 676 screws** 26 rows × 13 joists × 2 screws where a board crosses a joist = 676

## What does this list leave out?

-   Stairs and railing: the [deck stair calculator](https://decktally.com/deck-stair-calculator/) and the [deck railing calculator](https://decktally.com/deck-railing-calculator/) count them.
-   Prices. The [deck cost calculator](https://decktally.com/deck-cost-calculator/) prices boards, joists and screws with your own numbers.
-   Ledger fasteners and flashing, post bases and caps, hanger nails, blocking and bracing.
-   Freestanding decks, decks with more than one beam, cantilevered joists and anything that is not a rectangle.
-   Whatever your local code amends. Check the list with your building department before you buy.

## FAQ

### What materials do I need to build a deck?

Decking boards and their screws; joists, a ledger on the house, a rim joist and joist hangers; a beam with posts under it; and a concrete footing under every post. Stairs, railing, flashing, hardware and finish come on top. For the 16 × 12 ft example that is 29 boards, 13 joists, 13 hangers, 2 boards for the ledger and rim, one beam, 4 posts and 4 footings.

### How much lumber do I need for a 16 × 12 deck?

29 deck boards 16 ft long with 10% waste, 13 2 × 10 joists 12 ft long at 16 inch spacing, a ledger and a rim joist 16 ft long, and a 16 ft beam of two 2 × 10 or one 3 × 10. The beam may span 5 ft 8 in between posts while carrying 12 ft joists, so it needs 4 posts.

### How do I make a deck materials list?

Work from the top down. Count the rows of decking across the width and turn them into boards. Count the joists along the length at your spacing, and check their span against the span table. Size the beam from the joist span, divide its length by its allowable span for the posts, and read a footing for each post from the footing table. This page does those steps in that order and shows the working for each.

### How many footings does a deck need?

One under each post, and the posts follow from the beam. The example's beam needs 4 posts, so 4 footings, each 21 in round and 8 in thick on 1,500 psf soil, taking 6.41 cu ft of concrete between them. A ledger carries the house side of an attached deck, so there are no footings there.

### Does the list include stairs and railing?

No. Stairs depend on the height of the deck and railing on which edges are open, neither of which the list asks for. The deck stair calculator and the deck railing calculator count them, and the ledger must be at least a 2 × 8 whatever the joists are.

## Sources

The counts are arithmetic. The spans, footing sizes, waste allowances and code limits behind the list come from these publications. Follow them and your local building code over this page where they differ.

-   [2021 International Residential Code, Table R507.7 (maximum joist spacing for wood decking)](https://codes.iccsafe.org/content/IRC2021P2/chapter-5-floors), International Code Council. Joist spacing allowed for 1.25-inch and 2-inch wood decking, laid across the joists or diagonally. Local amendments can differ, so check your building department.
-   [Trex Decking Installation Guide (2022)](https://www.trex.com/content/dam/trex/literature/product-installation/2022-trex-decking-installation-guide.pdf), Trex Company. Joist spacing for composite boards (16 inches residential, 12 inches commercial, 4 inches less at a 45-degree angle) and the minimum 3/16-inch gap between boards.
-   [DCA 6: Prescriptive Residential Wood Deck Construction Guide (2015)](https://awc.org/wp-content/uploads/2021/12/AWC-DCA62015-DeckGuide-1804.pdf), American Wood Council. Two screws or nails where each board crosses a joist, boards gapped about 1/8 inch, and each length of decking resting on at least three joists.
-   [TimberTech Composite and Specialty Decking Installation & Maintenance Guide (rev. 09/23)](https://assets.timbertech.com/content/dam/wp-content/TimberTech-Composite-Installation-Guide-ENG.pdf), TimberTech (The AZEK Company). The default 10% waste allowance: the guide recommends adding roughly 10% to the board count as a scrap factor.
-   [Decking Installation Overview](https://www.finehomebuilding.com/project-guides/decks/decking-installation-overview), Fine Homebuilding. About 10% waste and error for boards laid straight, and 15% for boards laid at a 45-degree angle.
-   [Deck board and materials calculator](https://www.decks.com/calculators/decking-calculator/), Decks.com (Trex Company). Corroborates the 10% and 15% allowances, and puts complex patterns such as herringbone at up to 20% waste.
-   [How Many Deck Boards Do I Need? (2023)](https://www.trex.com/deck-ideas/how-many-deck-boards-do-i-need-/), Trex Company. The 5% waste rule of thumb some manufacturer guides use, and its 12 × 12 ft counts (27 boards at 12 ft, 21 at 16 ft), which the deck-size pages reconcile with the 10% figure here.
-   [American Softwood Lumber Standard, Voluntary Product Standard PS 20](https://alsc.org/lumber-additional-documents-ps-20/), American Lumber Standard Committee. Actual sizes of nominal lumber: a 2 × 6 is 1.5 by 5.5 inches, a 2 × 4 is 1.5 by 3.5 inches, a 2 × 8 is 1.5 by 7.25 inches.
-   [DCA 6: Prescriptive Residential Wood Deck Construction Guide (2015), Table 2 and the joist and hanger sections](https://awc.org/wp-content/uploads/2021/12/AWC-DCA62015-DeckGuide-1804.pdf), American Wood Council. Every allowable span and overhang in the table (40 psf live load, 10 psf dead load, No. 2 grade, wet service, L/360 deflection); the 18 ft joist limit; the overhang limit of a quarter of the span; the 2 × 8 minimum for a ledger; how a span is measured; joists hung from the ledger or beam on hangers at least 60% of the ledger or beam depth.
-   [2021 International Residential Code, Section R507.6 and Table R507.6 (deck joist spans)](https://codes.iccsafe.org/content/IRC2021P2/chapter-5-floors), International Code Council. The same joist spans as adopted into the model code. Local amendments can differ, so check your building department.
-   [DCA 6: Prescriptive Residential Wood Deck Construction Guide (2015), Table 3A and Beam Size & Assembly Requirements](https://awc.org/wp-content/uploads/2021/12/AWC-DCA62015-DeckGuide-1804.pdf), American Wood Council. Every beam span in the table (40 psf live load, 10 psf dead load, No. 2 grade, wet service, L/360 deflection), read under the joist-span column at or above the actual joist span; a beam may extend past a post by up to a quarter of its span; beam depth must match or exceed joist depth where joists hang from its side.
-   [2021 International Residential Code, Section R507.5 (deck beams)](https://codes.iccsafe.org/content/IRC2021P2/chapter-5-floors), International Code Council. The code section for deck beam spans and bearing. Local amendments can differ, so check your building department.
-   [DCA 6: Prescriptive Residential Wood Deck Construction Guide (2015), Table 4, Footings, Post Requirements and Commentary Table C4B](https://awc.org/wp-content/uploads/2021/12/AWC-DCA62015-DeckGuide-1804.pdf), American Wood Council. Every footing diameter, square size and thickness (40 psf live load, 10 psf dead load, quarter-span overhangs on beam and joists, 150 pcf concrete of 2,500 psi), at 1,500 psf soil in Table 4 and at 2,000, 2,500 and 3,000 psf in Table C4B; the 6 × 6 post heights by species; the 0.9 factor for corner posts; footings at least 12 inches below undisturbed ground or below the frost line; footings within 5 ft of the house bearing at the house footing's elevation; posts 6 × 6 or larger and 8 × 8 posts to 14 ft.
-   [2021 International Residential Code, Sections R507.3 (deck footings) and R403 (footings)](https://codes.iccsafe.org/content/IRC2021P2/chapter-5-floors), International Code Council. The code sections for deck footings, which the guide cites as R403. Local amendments, soil values and frost depths differ, so check your building department.

Every publication the site cites is listed on the [methodology page](https://decktally.com/methodology/), with how the numbers are computed and checked. Found a mistake? [Send a correction](https://decktally.com/contact/). The [About page](https://decktally.com/about/) explains who runs DeckTally.

## More deck calculators

-   [Deck lumber calculator](https://decktally.com/deck-material-calculator/)
    
    Deck lumber and wood: boards, joists and screws for a rectangular deck, with optional cost.
    
-   [Deck joist calculator](https://decktally.com/deck-joist-calculator/)
    
    Joist count, span check against the AWC table, hangers and rim joists.
    
-   [Deck beam calculator](https://decktally.com/deck-beam-calculator/)
    
    Allowable beam span from the AWC table and the posts a beam needs.
    
-   [Deck footing calculator](https://decktally.com/deck-footing-calculator/)
    
    Footing size, thickness and concrete from the AWC table, with the tallest post.
    
-   [Deck screw calculator](https://decktally.com/deck-screw-calculator/)
    
    Deck screws or hidden clips, with an allowance and the boxes to buy.
    
-   [Deck stair calculator](https://decktally.com/deck-stair-calculator/)
    
    Risers, treads, stringer length and count, with the code limits checked.
    
-   [Deck railing calculator](https://decktally.com/deck-railing-calculator/)
    
    Posts, balusters, rails, cap and fasteners, with the gap checked.
    
-   [Deck cost calculator](https://decktally.com/deck-cost-calculator/)
    
    Boards, joists and screws priced with your own numbers.
    
-   [Deck stain calculator](https://decktally.com/deck-stain-calculator/)
    
    Gallons and cans from the coverage on your can.
    

Last reviewed November 16, 2026. Built and checked by [Hassan Razeen](https://decktally.com/about/#maintainer).

```json
{"@context":"https://schema.org","@type":"WebPage","@id":"https://decktally.com/deck-materials-list/#webpage","name":"Deck Materials List Calculator: Whole Deck | DeckTally","url":"https://decktally.com/deck-materials-list/","description":"Free deck materials list: boards, joists, hangers, beam, posts, footings, concrete and screws for a whole deck from its length and width, with the working.","inLanguage":"en","datePublished":"2026-11-16","dateModified":"2026-11-16","isPartOf":{"@id":"https://decktally.com/#website"},"author":{"@id":"https://decktally.com/#maintainer"},"breadcrumb":{"@id":"https://decktally.com/deck-materials-list/#breadcrumb"},"mainEntity":{"@id":"https://decktally.com/deck-materials-list/#app"}}
{"@context":"https://schema.org","@type":"WebApplication","@id":"https://decktally.com/deck-materials-list/#app","name":"Deck Materials List Calculator","url":"https://decktally.com/deck-materials-list/","description":"Free deck materials list: boards, joists, hangers, beam, posts, footings, concrete and screws for a whole deck from its length and width, with the working.","inLanguage":"en","datePublished":"2026-11-16","dateModified":"2026-11-16","isPartOf":{"@id":"https://decktally.com/#website"},"image":"https://decktally.com/og.png","applicationCategory":"UtilitiesApplication","operatingSystem":"Any","browserRequirements":"Requires a modern web browser.","isAccessibleForFree":true,"featureList":["Deck boards, joists, joist hangers, ledger and rim joist from the deck length and width","Beam, posts and footings from the AWC DCA 6 span and footing tables","Joist span checked against the span table","Concrete for the footings","Deck screws","Working shown for every line","Imperial and metric units"],"offers":{"@type":"Offer","price":"0","priceCurrency":"USD"},"publisher":{"@type":"Organization","@id":"https://decktally.com/#organization","name":"DeckTally","url":"https://decktally.com/","description":"Free deck building calculators that show the working behind every number and cite the code, guide or standard each figure comes from.","logo":{"@type":"ImageObject","url":"https://decktally.com/icons/512.png","width":512,"height":512}}}
{"@context":"https://schema.org","@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What materials do I need to build a deck?","acceptedAnswer":{"@type":"Answer","text":"Decking boards and their screws; joists, a ledger on the house, a rim joist and joist hangers; a beam with posts under it; and a concrete footing under every post. Stairs, railing, flashing, hardware and finish come on top. For the 16 × 12 ft example that is 29 boards, 13 joists, 13 hangers, 2 boards for the ledger and rim, one beam, 4 posts and 4 footings."}},{"@type":"Question","name":"How much lumber do I need for a 16 × 12 deck?","acceptedAnswer":{"@type":"Answer","text":"29 deck boards 16 ft long with 10% waste, 13 2 × 10 joists 12 ft long at 16 inch spacing, a ledger and a rim joist 16 ft long, and a 16 ft beam of two 2 × 10 or one 3 × 10. The beam may span 5 ft 8 in between posts while carrying 12 ft joists, so it needs 4 posts."}},{"@type":"Question","name":"How do I make a deck materials list?","acceptedAnswer":{"@type":"Answer","text":"Work from the top down. Count the rows of decking across the width and turn them into boards. Count the joists along the length at your spacing, and check their span against the span table. Size the beam from the joist span, divide its length by its allowable span for the posts, and read a footing for each post from the footing table. This page does those steps in that order and shows the working for each."}},{"@type":"Question","name":"How many footings does a deck need?","acceptedAnswer":{"@type":"Answer","text":"One under each post, and the posts follow from the beam. The example's beam needs 4 posts, so 4 footings, each 21 in round and 8 in thick on 1,500 psf soil, taking 6.41 cu ft of concrete between them. A ledger carries the house side of an attached deck, so there are no footings there."}},{"@type":"Question","name":"Does the list include stairs and railing?","acceptedAnswer":{"@type":"Answer","text":"No. Stairs depend on the height of the deck and railing on which edges are open, neither of which the list asks for. The deck stair calculator and the deck railing calculator count them, and the ledger must be at least a 2 × 8 whatever the joists are."}}]}
{"@context":"https://schema.org","@type":"BreadcrumbList","@id":"https://decktally.com/deck-materials-list/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https://decktally.com/"},{"@type":"ListItem","position":2,"name":"Deck Materials List Calculator","item":"https://decktally.com/deck-materials-list/"}]}
```
