---
title: "How Many Deck Boards Do I Need? Counts by Deck Size"
description: "How to count deck boards for any deck, with boards, joists and screws for nine sizes from 8x8 to 20x20, the count at every board length, and the working."
author: "Hassan Razeen"
datePublished: "2026-10-21"
dateModified: "2026-10-21"
image: "https://decktally.com/og.png"
url: "https://decktally.com/how-many-deck-boards/"
---

# How many deck boards do I need?

Count the rows of boards across the deck, multiply by the deck length to get linear feet, add a waste allowance, and divide by the length of board you will buy. A 10 × 10 ft deck with 5.5-inch boards, a 0.25-inch gap, 10% waste and joists at 16 inches needs 24 boards 10 ft long, 9 joists and 378 screws. The table gives the same answer for 9 common sizes, and each size has its own section below with the working, the count at every board length, and what a different waste allowance or joist spacing does to it.

## Deck boards by deck size

With 5.5-inch boards, a 0.25-inch gap, joists at 16 inches and 10% waste. Boards run along the longer side and are bought at that length, so every row is one uncut board. The second board column uses the other common length and assumes the offcut from one row starts the next.

Deck boards, joists and screws for common deck sizes
| Deck size | Rows | Boards | Other length | Joists | Screws |
| --- | --- | --- | --- | --- | --- |
| [8 × 8 ft](https://decktally.com/how-many-deck-boards/#deck-8x8) | 17 | 19 × 8 ft | 10 × 16 ft | 7 | 238 |
| [8 × 10 ft](https://decktally.com/how-many-deck-boards/#deck-8x10) | 17 | 19 × 10 ft | 12 × 16 ft | 9 | 306 |
| [10 × 10 ft](https://decktally.com/how-many-deck-boards/#deck-10x10) | 21 | 24 × 10 ft | 15 × 16 ft | 9 | 378 |
| [10 × 12 ft](https://decktally.com/how-many-deck-boards/#deck-10x12) | 21 | 24 × 12 ft | 18 × 16 ft | 10 | 420 |
| [12 × 12 ft](https://decktally.com/how-many-deck-boards/#deck-12x12) | 26 | 29 × 12 ft | 22 × 16 ft | 10 | 520 |
| [12 × 16 ft](https://decktally.com/how-many-deck-boards/#deck-12x16) | 26 | 29 × 16 ft | 39 × 12 ft | 13 | 676 |
| [16 × 16 ft](https://decktally.com/how-many-deck-boards/#deck-16x16) | 34 | 38 × 16 ft | 50 × 12 ft | 13 | 884 |
| [16 × 20 ft](https://decktally.com/how-many-deck-boards/#deck-16x20) | 34 | 38 × 20 ft | 47 × 16 ft | 16 | 1,088 |
| [20 × 20 ft](https://decktally.com/how-many-deck-boards/#deck-20x20) | 42 | 47 × 20 ft | 58 × 16 ft | 16 | 1,344 |

Not your size, or different boards? The [deck lumber calculator](https://decktally.com/deck-material-calculator/) takes any rectangle, board width, gap, board length, joist spacing and waste allowance, in feet or meters.

## How to count deck boards yourself

Four steps, shown for the 10 × 10 ft deck above.

1.  **Rows of boards.** Turn the deck width into inches and divide by one board width plus one gap: 120 ÷ (5.5 + 0.25) = 20.87, rounded up to 21 rows. A partial row still needs a whole board.
2.  **Linear feet.** Multiply the rows by the deck length: 21 × 10 = 210 linear feet of decking.
3.  **Waste.** Add the allowance: 210 × 1.1 = 231 linear feet.
4.  **Boards to buy.** Divide by the board length and round up: 231 ÷ 10 = 23.1, so 24 boards. Joists are the deck length divided by the spacing, rounded up, plus one; screws are rows × joists × 2.

## What changes the count

-   **Board width.** A nominal 6-inch board is 5.5 inches wide, a 2 × 4 is 3.5 and a 2 × 8 is 7.25. Narrower boards mean more rows; always use the actual width.
-   **Gap.** A wider gap means fewer rows. Composite makers specify their own, Trex at least 3/16 inch, and the American Wood Council's deck guide gaps wood boards about 1/8 inch.
-   **Board length.** A length that matches the deck gives one uncut board per row. Any other length only pays off if the offcuts are long enough to reuse.
-   **Layout.** Diagonal boards need about 15% waste instead of 10%, and herringbone or a picture-frame border more still. The calculator's [sources](https://decktally.com/deck-material-calculator/#sources) list where each figure comes from.

## Boards, joists and screws for each deck size

Each size below uses 5.5-inch boards, a 0.25-inch gap, joists at 16 inches and 10% waste unless it says otherwise. Every figure is computed by the calculator, so you can check it there with your own boards.

### How many deck boards for an 8x8 deck?

An 8 × 8 ft deck needs 19 deck boards 8 ft long, with 5.5-inch boards, a 0.25-inch gap and 10% waste: 96 ÷ 5.75 = 16.7, rounded up to 17 rows, 17 × 8 = 136 linear feet, 136 × 1.1 = 149.6, and 149.6 ÷ 8 = 18.7, rounded up to 19. With joists at 16 inches it also needs 7 joists 8 ft long and 238 screws.

By board length: 19 at 8 ft, 15 at 10 ft, 13 at 12 ft, 10 at 16 ft and 8 at 20 ft. The 16 ft figure is 149.6 linear feet ÷ 16 = 9.35, rounded up to 10, and like every length other than 8 ft it assumes the offcut from one row starts the next; for one uncut board per row buy 17 boards at least 8 ft long. An 8 × 8 ft deck is 8 ft along the boards, so 8 ft boards fit with nothing left over. The other lengths leave an offcut on every row: 10 ft (1 board per row, 2 ft over), 12 ft (1 board per row, 4 ft over), 16 ft (1 board per row, 8 ft over) and 20 ft (1 board per row, 12 ft over).

With 8 ft boards, 5% waste gives 18 boards, 10% gives 19 boards and 15% gives 20 boards.

Joists: 96 ÷ 16 = 6 spaces, plus one for the far end, so 7 joists 8 ft long. Screws: 17 rows × 7 joists × 2 per crossing = 238. At 12 inches it is 9 joists and 306 screws and at 24 inches it is 5 joists and 170 screws.

[Open the calculator with this deck's sizes in the link](https://decktally.com/deck-material-calculator/?length=8&width=8&stockLength=8) to change the boards, gap, spacing or waste.

### How many deck boards for an 8x10 deck?

An 8 × 10 ft deck needs 19 deck boards 10 ft long, with 5.5-inch boards, a 0.25-inch gap and 10% waste: 96 ÷ 5.75 = 16.7, rounded up to 17 rows, 17 × 10 = 170 linear feet, 170 × 1.1 = 187, and 187 ÷ 10 = 18.7, rounded up to 19. With joists at 16 inches it also needs 9 joists 8 ft long and 306 screws.

By board length: 24 at 8 ft, 19 at 10 ft, 16 at 12 ft, 12 at 16 ft and 10 at 20 ft. The 16 ft figure is 187 linear feet ÷ 16 = 11.69, rounded up to 12, and like every length other than 10 ft it assumes the offcut from one row starts the next; for one uncut board per row buy 17 boards at least 10 ft long. An 8 × 10 ft deck is 10 ft along the boards, so 10 ft boards fit with nothing left over. The other lengths leave an offcut on every row: 8 ft (2 boards per row, 6 ft over), 12 ft (1 board per row, 2 ft over), 16 ft (1 board per row, 6 ft over) and 20 ft (1 board per row, 10 ft over).

With 10 ft boards, 5% waste gives 18 boards, 10% gives 19 boards and 15% gives 20 boards.

Joists: 120 ÷ 16 = 7.5, rounded up to 8 spaces, plus one for the far end, so 9 joists 8 ft long. Screws: 17 rows × 9 joists × 2 per crossing = 306. At 12 inches it is 11 joists and 374 screws and at 24 inches it is 6 joists and 204 screws.

Run the boards along the 8 ft side instead and the deck has 21 rows, needs 24 boards 8 ft long and 7 joists 10 ft long at 16 inches, with 294 screws.

[Open the calculator with this deck's sizes in the link](https://decktally.com/deck-material-calculator/?length=10&width=8&stockLength=10) to change the boards, gap, spacing or waste.

### How many deck boards for a 10x10 deck?

A 10 × 10 ft deck needs 24 deck boards 10 ft long, with 5.5-inch boards, a 0.25-inch gap and 10% waste: 120 ÷ 5.75 = 20.87, rounded up to 21 rows, 21 × 10 = 210 linear feet, 210 × 1.1 = 231, and 231 ÷ 10 = 23.1, rounded up to 24. With joists at 16 inches it also needs 9 joists 10 ft long and 378 screws.

By board length: 29 at 8 ft, 24 at 10 ft, 20 at 12 ft, 15 at 16 ft and 12 at 20 ft. The 16 ft figure is 231 linear feet ÷ 16 = 14.44, rounded up to 15, and like every length other than 10 ft it assumes the offcut from one row starts the next; for one uncut board per row buy 21 boards at least 10 ft long. A 10 × 10 ft deck is 10 ft along the boards, so 10 ft boards fit with nothing left over. The other lengths leave an offcut on every row: 8 ft (2 boards per row, 6 ft over), 12 ft (1 board per row, 2 ft over), 16 ft (1 board per row, 6 ft over) and 20 ft (1 board per row, 10 ft over).

With 10 ft boards, 5% waste gives 23 boards, 10% gives 24 boards and 15% gives 25 boards.

Joists: 120 ÷ 16 = 7.5, rounded up to 8 spaces, plus one for the far end, so 9 joists 10 ft long. Screws: 21 rows × 9 joists × 2 per crossing = 378. At 12 inches it is 11 joists and 462 screws and at 24 inches it is 6 joists and 252 screws.

[Open the calculator with this deck's sizes in the link](https://decktally.com/deck-material-calculator/?length=10&width=10&stockLength=10) to change the boards, gap, spacing or waste.

### How many deck boards for a 10x12 deck?

A 10 × 12 ft deck needs 24 deck boards 12 ft long, with 5.5-inch boards, a 0.25-inch gap and 10% waste: 120 ÷ 5.75 = 20.87, rounded up to 21 rows, 21 × 12 = 252 linear feet, 252 × 1.1 = 277.2, and 277.2 ÷ 12 = 23.1, rounded up to 24. With joists at 16 inches it also needs 10 joists 10 ft long and 420 screws.

By board length: 35 at 8 ft, 28 at 10 ft, 24 at 12 ft, 18 at 16 ft and 14 at 20 ft. The 16 ft figure is 277.2 linear feet ÷ 16 = 17.33, rounded up to 18, and like every length other than 12 ft it assumes the offcut from one row starts the next; for one uncut board per row buy 21 boards at least 12 ft long. A 10 × 12 ft deck is 12 ft along the boards, so 12 ft boards fit with nothing left over. The other lengths leave an offcut on every row: 8 ft (2 boards per row, 4 ft over), 10 ft (2 boards per row, 8 ft over), 16 ft (1 board per row, 4 ft over) and 20 ft (1 board per row, 8 ft over).

With 12 ft boards, 5% waste gives 23 boards, 10% gives 24 boards and 15% gives 25 boards.

Joists: 144 ÷ 16 = 9 spaces, plus one for the far end, so 10 joists 10 ft long. Screws: 21 rows × 10 joists × 2 per crossing = 420. At 12 inches it is 13 joists and 546 screws and at 24 inches it is 7 joists and 294 screws.

Run the boards along the 10 ft side instead and the deck has 26 rows, needs 29 boards 10 ft long and 9 joists 12 ft long at 16 inches, with 468 screws.

[Open the calculator with this deck's sizes in the link](https://decktally.com/deck-material-calculator/?length=12&width=10&stockLength=12) to change the boards, gap, spacing or waste.

### How many deck boards for a 12x12 deck?

A 12 × 12 ft deck needs 29 deck boards 12 ft long, with 5.5-inch boards, a 0.25-inch gap and 10% waste: 144 ÷ 5.75 = 25.04, rounded up to 26 rows, 26 × 12 = 312 linear feet, 312 × 1.1 = 343.2, and 343.2 ÷ 12 = 28.6, rounded up to 29. With joists at 16 inches it also needs 10 joists 12 ft long and 520 screws.

By board length: 43 at 8 ft, 35 at 10 ft, 29 at 12 ft, 22 at 16 ft and 18 at 20 ft. The 16 ft figure is 343.2 linear feet ÷ 16 = 21.45, rounded up to 22, and like every length other than 12 ft it assumes the offcut from one row starts the next; for one uncut board per row buy 26 boards at least 12 ft long. A 12 × 12 ft deck is 12 ft along the boards, so 12 ft boards fit with nothing left over. The other lengths leave an offcut on every row: 8 ft (2 boards per row, 4 ft over), 10 ft (2 boards per row, 8 ft over), 16 ft (1 board per row, 4 ft over) and 20 ft (1 board per row, 8 ft over).

With 12 ft boards, 5% waste gives 28 boards, 10% gives 29 boards and 15% gives 30 boards. Trex's board-count guide quotes 5% and lists 27 boards at 12 ft and 21 at 16 ft for this size; its row count is 144 ÷ 5.5 with no gap, which is why it sits a board or two under the figures here.

Joists: 144 ÷ 16 = 9 spaces, plus one for the far end, so 10 joists 12 ft long. Screws: 26 rows × 10 joists × 2 per crossing = 520. At 12 inches it is 13 joists and 676 screws and at 24 inches it is 7 joists and 364 screws.

[Open the calculator with this deck's sizes in the link](https://decktally.com/deck-material-calculator/?length=12&width=12&stockLength=12) to change the boards, gap, spacing or waste.

### How many deck boards for a 12x16 deck?

A 12 × 16 ft deck needs 29 deck boards 16 ft long, with 5.5-inch boards, a 0.25-inch gap and 10% waste: 144 ÷ 5.75 = 25.04, rounded up to 26 rows, 26 × 16 = 416 linear feet, 416 × 1.1 = 457.6, and 457.6 ÷ 16 = 28.6, rounded up to 29. With joists at 16 inches it also needs 13 joists 12 ft long and 676 screws.

By board length: 58 at 8 ft, 46 at 10 ft, 39 at 12 ft, 29 at 16 ft and 23 at 20 ft. The 12 ft figure is 457.6 linear feet ÷ 12 = 38.13, rounded up to 39, and like every length other than 16 ft it assumes the offcut from one row starts the next; for one uncut board per row buy 26 boards at least 16 ft long. A 12 × 16 ft deck is 16 ft along the boards, so 8 ft (2 per row) and 16 ft boards all fit with nothing left over. The other lengths leave an offcut on every row: 10 ft (2 boards per row, 4 ft over), 12 ft (2 boards per row, 8 ft over) and 20 ft (1 board per row, 4 ft over).

With 16 ft boards, 5% waste gives 28 boards, 10% gives 29 boards and 15% gives 30 boards.

Joists: 192 ÷ 16 = 12 spaces, plus one for the far end, so 13 joists 12 ft long. Screws: 26 rows × 13 joists × 2 per crossing = 676. At 12 inches it is 17 joists and 884 screws and at 24 inches it is 9 joists and 468 screws.

Run the boards along the 12 ft side instead and the deck has 34 rows, needs 38 boards 12 ft long and 10 joists 16 ft long at 16 inches, with 680 screws.

[Open the calculator with this deck's sizes in the link](https://decktally.com/deck-material-calculator/?length=16&width=12&stockLength=16) to change the boards, gap, spacing or waste.

### How many deck boards for a 16x16 deck?

A 16 × 16 ft deck needs 38 deck boards 16 ft long, with 5.5-inch boards, a 0.25-inch gap and 10% waste: 192 ÷ 5.75 = 33.39, rounded up to 34 rows, 34 × 16 = 544 linear feet, 544 × 1.1 = 598.4, and 598.4 ÷ 16 = 37.4, rounded up to 38. With joists at 16 inches it also needs 13 joists 16 ft long and 884 screws.

By board length: 75 at 8 ft, 60 at 10 ft, 50 at 12 ft, 38 at 16 ft and 30 at 20 ft. The 12 ft figure is 598.4 linear feet ÷ 12 = 49.87, rounded up to 50, and like every length other than 16 ft it assumes the offcut from one row starts the next; for one uncut board per row buy 34 boards at least 16 ft long. A 16 × 16 ft deck is 16 ft along the boards, so 8 ft (2 per row) and 16 ft boards all fit with nothing left over. The other lengths leave an offcut on every row: 10 ft (2 boards per row, 4 ft over), 12 ft (2 boards per row, 8 ft over) and 20 ft (1 board per row, 4 ft over).

With 16 ft boards, 5% waste gives 36 boards, 10% gives 38 boards and 15% gives 40 boards.

Joists: 192 ÷ 16 = 12 spaces, plus one for the far end, so 13 joists 16 ft long. Screws: 34 rows × 13 joists × 2 per crossing = 884. At 12 inches it is 17 joists and 1,156 screws and at 24 inches it is 9 joists and 612 screws.

[Open the calculator with this deck's sizes in the link](https://decktally.com/deck-material-calculator/?length=16&width=16&stockLength=16) to change the boards, gap, spacing or waste.

### How many deck boards for a 16x20 deck?

A 16 × 20 ft deck needs 38 deck boards 20 ft long, with 5.5-inch boards, a 0.25-inch gap and 10% waste: 192 ÷ 5.75 = 33.39, rounded up to 34 rows, 34 × 20 = 680 linear feet, 680 × 1.1 = 748, and 748 ÷ 20 = 37.4, rounded up to 38. With joists at 16 inches it also needs 16 joists 16 ft long and 1,088 screws.

By board length: 94 at 8 ft, 75 at 10 ft, 63 at 12 ft, 47 at 16 ft and 38 at 20 ft. The 16 ft figure is 748 linear feet ÷ 16 = 46.75, rounded up to 47, and like every length other than 20 ft it assumes the offcut from one row starts the next; for one uncut board per row buy 34 boards at least 20 ft long. A 16 × 20 ft deck is 20 ft along the boards, so 10 ft (2 per row) and 20 ft boards all fit with nothing left over. The other lengths leave an offcut on every row: 8 ft (3 boards per row, 4 ft over), 12 ft (2 boards per row, 4 ft over) and 16 ft (2 boards per row, 12 ft over).

With 20 ft boards, 5% waste gives 36 boards, 10% gives 38 boards and 15% gives 40 boards.

Joists: 240 ÷ 16 = 15 spaces, plus one for the far end, so 16 joists 16 ft long. Screws: 34 rows × 16 joists × 2 per crossing = 1,088. At 12 inches it is 21 joists and 1,428 screws and at 24 inches it is 11 joists and 748 screws.

Run the boards along the 16 ft side instead and the deck has 42 rows, needs 47 boards 16 ft long and 13 joists 20 ft long at 16 inches, with 1,092 screws.

[Open the calculator with this deck's sizes in the link](https://decktally.com/deck-material-calculator/?length=20&width=16&stockLength=20) to change the boards, gap, spacing or waste.

### How many deck boards for a 20x20 deck?

A 20 × 20 ft deck needs 47 deck boards 20 ft long, with 5.5-inch boards, a 0.25-inch gap and 10% waste: 240 ÷ 5.75 = 41.74, rounded up to 42 rows, 42 × 20 = 840 linear feet, 840 × 1.1 = 924, and 924 ÷ 20 = 46.2, rounded up to 47. With joists at 16 inches it also needs 16 joists 20 ft long and 1,344 screws.

By board length: 116 at 8 ft, 93 at 10 ft, 77 at 12 ft, 58 at 16 ft and 47 at 20 ft. The 16 ft figure is 924 linear feet ÷ 16 = 57.75, rounded up to 58, and like every length other than 20 ft it assumes the offcut from one row starts the next; for one uncut board per row buy 42 boards at least 20 ft long. A 20 × 20 ft deck is 20 ft along the boards, so 10 ft (2 per row) and 20 ft boards all fit with nothing left over. The other lengths leave an offcut on every row: 8 ft (3 boards per row, 4 ft over), 12 ft (2 boards per row, 4 ft over) and 16 ft (2 boards per row, 12 ft over).

With 20 ft boards, 5% waste gives 45 boards, 10% gives 47 boards and 15% gives 49 boards.

Joists: 240 ÷ 16 = 15 spaces, plus one for the far end, so 16 joists 20 ft long. Screws: 42 rows × 16 joists × 2 per crossing = 1,344. At 12 inches it is 21 joists and 1,764 screws and at 24 inches it is 11 joists and 924 screws.

[Open the calculator with this deck's sizes in the link](https://decktally.com/deck-material-calculator/?length=20&width=20&stockLength=20) to change the boards, gap, spacing or waste.

## FAQ

### Should I buy 12 ft or 16 ft deck boards?

Buy the length that matches the side the boards run along when you can, so every row is one uncut board: a 12x12 deck takes 29 boards 12 ft long. Longer boards only save material if you use the offcuts: the same deck takes 22 boards 16 ft long when each 4 ft offcut starts the next row, or one per row, 26, if it does not. Price both totals with your supplier before you choose.

### How much extra decking should I buy?

Add about 10% for boards laid straight across the joists and 15% for boards laid at 45 degrees. TimberTech's installation guide and Fine Homebuilding both give about 10% for a straight layout, Trex's board-count guide works with 5%, and Decks.com puts patterns such as herringbone at up to 20%. Each size below shows what 5%, 10%, 15% do to its count.

### Do the counts include stairs or a picture-frame border?

No. Every count is for a plain rectangle with the boards laid straight and the joists running across them. Stairs, a picture-frame border, diagonal boards, rim joists, beams and hidden fastener clips all add material, so allow for them separately or raise the waste allowance.

Every number on this page is computed by the same code as the calculator, and the [About page](https://decktally.com/about/) explains how it is checked and how to report a mistake.

Last reviewed October 21, 2026. Built and checked by [Hassan Razeen](https://decktally.com/about/#maintainer).

```json
{"@context":"https://schema.org","@type":"WebPage","@id":"https://decktally.com/how-many-deck-boards/#webpage","name":"How Many Deck Boards Do I Need? Counts by Deck Size","url":"https://decktally.com/how-many-deck-boards/","description":"How to count deck boards for any deck, with boards, joists and screws for nine sizes from 8x8 to 20x20, the count at every board length, and the working.","inLanguage":"en","datePublished":"2026-10-21","dateModified":"2026-10-21","isPartOf":{"@id":"https://decktally.com/#website"},"author":{"@id":"https://decktally.com/#maintainer"},"breadcrumb":{"@id":"https://decktally.com/how-many-deck-boards/#breadcrumb"}}
{"@context":"https://schema.org","@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Should I buy 12 ft or 16 ft deck boards?","acceptedAnswer":{"@type":"Answer","text":"Buy the length that matches the side the boards run along when you can, so every row is one uncut board: a 12x12 deck takes 29 boards 12 ft long. Longer boards only save material if you use the offcuts: the same deck takes 22 boards 16 ft long when each 4 ft offcut starts the next row, or one per row, 26, if it does not. Price both totals with your supplier before you choose."}},{"@type":"Question","name":"How much extra decking should I buy?","acceptedAnswer":{"@type":"Answer","text":"Add about 10% for boards laid straight across the joists and 15% for boards laid at 45 degrees. TimberTech's installation guide and Fine Homebuilding both give about 10% for a straight layout, Trex's board-count guide works with 5%, and Decks.com puts patterns such as herringbone at up to 20%. Each size below shows what 5%, 10%, 15% do to its count."}},{"@type":"Question","name":"Do the counts include stairs or a picture-frame border?","acceptedAnswer":{"@type":"Answer","text":"No. Every count is for a plain rectangle with the boards laid straight and the joists running across them. Stairs, a picture-frame border, diagonal boards, rim joists, beams and hidden fastener clips all add material, so allow for them separately or raise the waste allowance."}}]}
{"@context":"https://schema.org","@type":"BreadcrumbList","@id":"https://decktally.com/how-many-deck-boards/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https://decktally.com/"},{"@type":"ListItem","position":2,"name":"How many deck boards","item":"https://decktally.com/how-many-deck-boards/"}]}
```
