---
title: "Deck Stair Stringer Calculator: Risers, Treads | DeckTally"
description: "Free deck stair calculator: risers and riser height from your total rise, treads, total run, stringer length and count, checked against the AWC deck guide."
author: "Hassan Razeen"
datePublished: "2026-10-22"
dateModified: "2026-11-16"
image: "https://decktally.com/og.png"
url: "https://decktally.com/deck-stair-calculator/"
---

# Deck Stair Stringer Calculator

To lay out deck stairs, divide the total rise by the 7.75-inch maximum riser and round up to get the number of risers, divide the rise by that number for the riser height, multiply one fewer treads by the run to get the total run, and take the diagonal of rise and run for the stringer length. A 36-inch rise with a 10-inch run takes 5 risers of 7.2 inches and 4 treads, runs out 3 ft 4 in, and needs 3 stringers (2 × 12, 4 ft 6 in long), 8 tread boards and 24 screws.

## Your materials

Results update as you type.

Risers

5 risers

7.2 in (≈ 7 3/16 in) each

Total run

3 ft 4 in

Within the 6 ft stringer span

Stringers

3 stringers

2 × 12, 4 ft 6 in long

### How it adds up

1.  Risers 5 risers
    
    36 in rise ÷ 7.75 in maximum = 4.65, rounded up to 5 36 in ÷ 5 = 7.2 in (≈ 7 3/16 in) per riser
    
2.  Treads 4 treads
    
    5 risers − 1 = 4: the deck itself is the top step
    
3.  Total run 3 ft 4 in
    
    4 treads × 10 in = 3 ft 4 in DCA 6 Figure 28 allows a cut stringer to span 6 ft
    
4.  Stringers 3 stringers
    
    Cut stringers at most 18 in apart across 36 in, and never fewer than 3 = 3 Length: √(36 in² + 40 in²) = 4 ft 5.81 in, so 4 ft 6 in of stock before any extra for the top and bottom cuts
    
5.  Stringer layout 35.8° pitch
    
    Each notch: 7.2 in (≈ 7 3/16 in) rise by 10 in run Pitch: tan⁻¹(7.2 in ÷ 10 in) = 35.8° Bottom cut: 7.2 in riser − 1.5 in tread = 5.7 in (≈ 5 11/16 in), so the first step finishes as tall as the rest
    
6.  Tread boards 8 boards
    
    4 treads × 2 boards = 8 8 × 3 ft = 24 ft
    
7.  Tread fasteners 24 screws
    
    4 treads × 3 stringers × 2 #8 screws or 8d nails = 24
    
8.  Code checks Pass
    
    Run of 10 in meets the 10 in minimum. Width of 36 in meets the 36 in minimum. A stair guard is required: the rise is 30 in or more. A handrail is required on at least one side: 4 or more risers.
    

**Estimates only.** Results come from the formulas listed below and use no outside data. Check local building codes and your supplier before buying.

These results are for the default sizes. Turn on JavaScript to update them as you type.

  

## Your stair, from the side

-   5 risers of 7.2 in (≈ 7 3/16 in)
-   4 treads, 10 in run each
-   Stringer 4 ft 6 in at 35.8°, first notch 5.7 in (≈ 5 11/16 in) up

[**5** risers **3 ft 4 in** **3** stringers Results ↓](https://decktally.com/deck-stair-calculator/#results-heading) Embed this calculator on your site

Paste this where you want the calculator. It is free, shows no ads, works in any site, and links back to this page. Change the height to suit your layout.

Embed code <iframe src="https://decktally.com/embed/deck-stair-calculator/" height="1100" style="width:100%;border:0" loading="lazy" title="Deck Stair Stringer Calculator by DeckTally"></iframe> 

## What do I need to measure for deck stairs?

1.  The total rise: from the finished deck surface straight down to where the stair will land. Measure it, do not estimate it.
2.  How wide the stair will be, 36 inches at least.
3.  The run of each step, from one riser face to the next; 10 inches is the minimum and two 5.5-inch boards with a nosing give about 10.5.
4.  Cut stringers, notched for each step, or solid stringers with the treads on cleats between them.
5.  How many boards make up each tread, and how thick they are: the stringer's bottom is cut shorter by that thickness.

## How do I calculate stair stringers, risers and treads?

-   **Risers**: total rise ÷ 7.75, rounded up. Riser height is the rise divided by that count, so every riser is equal.
-   **Treads**: one fewer than the risers, because the deck is the top step.
-   **Total run**: treads × run. It is also the stringer span, checked against 6 ft for cut stringers and 13 ft 3 in for solid.
-   **Stringer length**: the diagonal, √(rise² + run²).
-   **Pitch**: the angle whose tangent is the riser height over the run, tan⁻¹(riser ÷ run).
-   **Bottom cut**: the riser height less the tread thickness. The first notch sits that far above the landing, so the first finished step is as tall as the rest.
-   **Stringers**: the width divided by the spacing limit, rounded up, plus one; three at least when they are cut.
-   **Tread boards and fasteners**: treads × boards per tread, each as long as the stair is wide; two screws per tread at every stringer, and four per cleat on solid stringers.

### Assumptions

-   The riser count is the fewest risers that keep each one at or under 7.75 inches, the maximum in the American Wood Council's deck guide and the IRC; all risers are made equal, which also satisfies the 0.38-inch variation limit. Many builders choose one more riser for a gentler stair.
-   The deck surface is the top step, so there is one tread fewer than risers. The run is the tread depth as the IRC measures it, from the face of one riser to the next; the tread boards overhang it by the nosing, which the guide puts at 0.75 to 1.25 inch. Riser heights are finished surface to finished surface, so the stringer's bottom is cut shorter by the tread thickness you enter; otherwise the first step comes out taller by that much. How the top of the stringer meets the deck frame sets the top step, so check that it too finishes at the riser height.
-   Stringers are 2 × 12 as the guide requires. Cut stringers are spaced at most 18 inches apart with never fewer than 3; solid stringers at most 36 inches. The stringer length is the plain diagonal, rounded up to the inch; add whatever your top and bottom cuts need and buy the next stock length.
-   Tread boards are counted from the number you enter per tread, each as long as the stair is wide. Fasteners follow the guide's schedule: two #8 screws or 8d nails per tread at each stringer, and on solid stringers four more into each 2 × 4 cleat. Risers, guards, handrails, posts, footings and the landing are not counted.

## Worked example

A 36-inch rise, 36 inches wide, 10-inch run, cut stringers, 2 boards per tread, each 1.5 inches thick:

-   **Risers: 5 risers, 7.2 in (≈ 7 3/16 in) each** 36 in rise ÷ 7.75 in maximum = 4.65, rounded up to 5 36 in ÷ 5 = 7.2 in (≈ 7 3/16 in) per riser
-   **Treads: 4 treads, 10 in run each** 5 risers − 1 = 4: the deck itself is the top step
-   **Total run: 3 ft 4 in, Within the 6 ft stringer span** 4 treads × 10 in = 3 ft 4 in DCA 6 Figure 28 allows a cut stringer to span 6 ft
-   **Stringers: 3 stringers, 2 × 12, 4 ft 6 in long** Cut stringers at most 18 in apart across 36 in, and never fewer than 3 = 3 Length: √(36 in² + 40 in²) = 4 ft 5.81 in, so 4 ft 6 in of stock before any extra for the top and bottom cuts
-   **Stringer layout: 35.8° pitch, First notch 5.7 in (≈ 5 11/16 in) above the landing** Each notch: 7.2 in (≈ 7 3/16 in) rise by 10 in run Pitch: tan⁻¹(7.2 in ÷ 10 in) = 35.8° Bottom cut: 7.2 in riser − 1.5 in tread = 5.7 in (≈ 5 11/16 in), so the first step finishes as tall as the rest
-   **Tread boards: 8 boards, 36 in long, 24 linear ft** 4 treads × 2 boards = 8 8 × 3 ft = 24 ft
-   **Tread fasteners: 24 screws, Two per tread at each stringer** 4 treads × 3 stringers × 2 #8 screws or 8d nails = 24
-   **Code checks: Pass, Guard, handrail** Run of 10 in meets the 10 in minimum. Width of 36 in meets the 36 in minimum. A stair guard is required: the rise is 30 in or more. A handrail is required on at least one side: 4 or more risers.

## What are the code requirements for deck stairs?

The limits the calculator checks, from the American Wood Council's deck guide, which cites IRC R311.7. Your local code may amend them.

-   Riser height at most 7.75 inches, with no riser differing from another by more than 0.375 inch.
-   Tread depth (run) at least 10 inches, with a nosing of 0.75 to 1.25 inch; an open riser may not pass a 4-inch sphere, and risers are 1× material at least.
-   Stair width at least 36 inches; a landing at least as wide and 36 inches in the direction of travel; an intermediate landing above a 12 ft rise.
-   Stringers 2 × 12; cut stringers at least 3, at most 18 inches apart, keeping 5 inches of wood below the notches, spanning at most 6 ft; solid stringers at most 36 inches apart spanning at most 13 ft 3 in.
-   A stair guard from a 30-inch rise; a handrail on at least one side from 4 risers, 34 to 38 inches above the nosings.
-   Minimum tread size (Table 6): Southern Pine: 2 × 4 or 5/4 on cut stringers, 2 × 8 on solid; Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir: 2 × 4 or 5/4 on cut stringers, 2 × 8 or 3 × 4 on solid; Redwood, Western Cedars, Ponderosa Pine, Red Pine: 2 × 4 or 5/4 on cut stringers, 2 × 10 or 3 × 4 on solid.

## What does this calculator leave out?

-   Risers, guards, handrails, posts, footings and landings, though it tells you when a guard, handrail or landing is required.
-   Turned or winding stairs: it lays out one straight run.
-   Extra stringer length for the top and bottom cuts, and stock lengths. Buy the next length your yard carries.
-   Local amendments. Your building department has the final say on every limit here.

## FAQ

### How many steps do I need for a 3 ft (36-inch) high deck?

5 risers and 4 treads: 36 ÷ 7.75 = 4.65, rounded up to 5, so each riser is 7.2 inches. A 30-inch deck takes 4 risers of 7.5 inches, a 48-inch deck 7 of 6.86 inches, and a 60-inch deck 8 of 7.5 inches.

### What is the maximum riser height for deck stairs?

7.75 inches, with no riser differing from another by more than 0.38 inch, under the American Wood Council's deck guide and IRC R311.7. The tread must run at least 10 inches, measured as the IRC measures tread depth, from the face of one riser to the next, with a nosing of 0.75 to 1.25 inch, and an open riser may not pass a 4-inch sphere.

### How long should stair stringers be?

The diagonal of the total rise and the total run: for the 36-inch example, √(36² + 40²) = 4 ft 5.81 in, so 4 ft 6 in of stock before the cuts at the top and bottom. A 48-inch rise with an 11-inch run gives 7 risers, a 5 ft 6 in run and a 6 ft 10 in stringer. Stringers must be 2 × 12, and a cut stringer may span only 6 ft horizontally, a solid one 13 ft 3 in, before it needs a post or a landing.

### How do I lay out and cut a stair stringer?

Mark the riser height on one arm of a framing square and the run on the other, then step the square down a 2 × 12 once for each tread. For the 36-inch example each notch is 7.2 inches (about 7 3/16 in) of rise by 10 inches of run. Cut the bottom of the stringer shorter by the tread thickness: 7.2 − 1.5 = 5.7 inches (about 5 11/16 in) from the landing to the first notch, so the first finished step matches the rest. A cut stringer must keep at least 5 inches of wood below the notches.

### What angle are deck stairs?

The angle whose tangent is the riser height over the run. The 36-inch example, with 7.2-inch risers and a 10-inch run, is pitched at 35.8°. The steepest stair the limits allow, a 7.75-inch riser over a 10-inch run, is 37.8°; a deeper run makes it shallower, and a 48-inch rise with an 11-inch run comes to 31.9°.

### How many stringers do deck stairs need?

At least 3 cut stringers, spaced no more than 18 inches apart, so a 36-inch stair takes 3 and a 48-inch stair takes 4. Solid stringers carrying the treads on 2 × 4 cleats may be 36 inches apart, so a 36-inch stair takes 2, but the guide's Table 6 then asks for thicker treads: 2 × 8 for Southern Pine; 2 × 8 or 3 × 4 for Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir; 2 × 10 or 3 × 4 for Redwood, Western Cedars, Ponderosa Pine, Red Pine. On cut stringers any group may use 2 × 4 or 5/4 boards.

### How wide do deck stairs have to be?

At least 36 inches, and any landing at least as wide as the stair and 36 inches in the direction of travel. A rise of more than 12 ft needs an intermediate landing.

### Do deck stairs need a handrail or a guard?

A handrail on at least one side once there are 4 or more risers, 34 to 38 inches above the tread nosings, and a stair guard once the total rise is 30 inches or more. The guide gives that threshold twice: its stair figure (Figure 30) says a total rise of 30 inches or more, while its Guard Requirements and IRC R312.1.1 say more than 30 inches above grade, so at exactly 30 inches ask your building department. The 36-inch example needs both; a 30-inch rise with 4 risers needs a guard and a handrail.

The [deck joist calculator](https://decktally.com/deck-joist-calculator/) frames the deck these stairs lead to, and the [deck screw calculator](https://decktally.com/deck-screw-calculator/) counts the fasteners for its boards.

## Sources

The counts are arithmetic. Every limit on this page comes from these publications. Follow them and your local building code over this page where they differ.

-   [DCA 6: Prescriptive Residential Wood Deck Construction Guide (2015), Stair and Stair Handrail Requirements, Figures 27 to 33 and Table 6](https://awc.org/wp-content/uploads/2021/12/AWC-DCA62015-DeckGuide-1804.pdf), American Wood Council. The 7-3/4 inch maximum riser, 10 inch minimum tread, 3/8 inch variation limit and 3/4 to 1-1/4 inch nosing; 36 inch minimum width; 2 × 12 stringers, three cut stringers minimum at 18 inches apart or solid stringers at 36 inches; cut stringers spanning 6 ft and solid 13 ft 3 in; a landing above a 12 ft rise; a guard from a 30 inch rise; a handrail from 4 risers; two #8 screws or 8d nails per tread at each stringer and four per 2 × 4 cleat on solid stringers; tread sizes by species.
-   [2021 International Residential Code, Section R311.7 (stairways)](https://codes.iccsafe.org/content/IRC2021P2/chapter-3-building-planning), International Code Council. The code section the guide cites for stair width, riser height, tread depth (measured from the face of one riser to the next) and handrails. Local amendments can differ, so check your building department.

Every publication the site cites is listed on the [methodology page](https://decktally.com/methodology/), with how the numbers are computed and checked. Found a mistake? [Send a correction](https://decktally.com/contact/). The [About page](https://decktally.com/about/) explains who runs DeckTally.

## More deck calculators

-   [Deck materials list](https://decktally.com/deck-materials-list/)
    
    One list for the whole deck: decking, joists, beam, posts, footings and screws.
    
-   [Deck lumber calculator](https://decktally.com/deck-material-calculator/)
    
    Deck lumber and wood: boards, joists and screws for a rectangular deck, with optional cost.
    
-   [Deck joist calculator](https://decktally.com/deck-joist-calculator/)
    
    Joist count, span check against the AWC table, hangers and rim joists.
    
-   [Deck beam calculator](https://decktally.com/deck-beam-calculator/)
    
    Allowable beam span from the AWC table and the posts a beam needs.
    
-   [Deck footing calculator](https://decktally.com/deck-footing-calculator/)
    
    Footing size, thickness and concrete from the AWC table, with the tallest post.
    
-   [Deck screw calculator](https://decktally.com/deck-screw-calculator/)
    
    Deck screws or hidden clips, with an allowance and the boxes to buy.
    
-   [Deck railing calculator](https://decktally.com/deck-railing-calculator/)
    
    Posts, balusters, rails, cap and fasteners, with the gap checked.
    
-   [Deck cost calculator](https://decktally.com/deck-cost-calculator/)
    
    Boards, joists and screws priced with your own numbers.
    
-   [Deck stain calculator](https://decktally.com/deck-stain-calculator/)
    
    Gallons and cans from the coverage on your can.
    

Last reviewed November 16, 2026. Built and checked by [Hassan Razeen](https://decktally.com/about/#maintainer).

```json
{"@context":"https://schema.org","@type":"WebPage","@id":"https://decktally.com/deck-stair-calculator/#webpage","name":"Deck Stair Stringer Calculator: Risers, Treads | DeckTally","url":"https://decktally.com/deck-stair-calculator/","description":"Free deck stair calculator: risers and riser height from your total rise, treads, total run, stringer length and count, checked against the AWC deck guide.","inLanguage":"en","datePublished":"2026-10-22","dateModified":"2026-11-16","isPartOf":{"@id":"https://decktally.com/#website"},"author":{"@id":"https://decktally.com/#maintainer"},"breadcrumb":{"@id":"https://decktally.com/deck-stair-calculator/#breadcrumb"},"mainEntity":{"@id":"https://decktally.com/deck-stair-calculator/#app"}}
{"@context":"https://schema.org","@type":"WebApplication","@id":"https://decktally.com/deck-stair-calculator/#app","name":"Deck Stair Stringer Calculator","url":"https://decktally.com/deck-stair-calculator/","description":"Free deck stair calculator: risers and riser height from your total rise, treads, total run, stringer length and count, checked against the AWC deck guide.","inLanguage":"en","datePublished":"2026-10-22","dateModified":"2026-11-16","isPartOf":{"@id":"https://decktally.com/#website"},"image":"https://decktally.com/og.png","applicationCategory":"UtilitiesApplication","operatingSystem":"Any","browserRequirements":"Requires a modern web browser.","isAccessibleForFree":true,"featureList":["Riser count and height from the total rise, at or under 7-3/4 inches","Treads, total run and stringer length","Stair pitch in degrees, the notch to mark and the shorter cut at the bottom of the stringer","Side-view drawing of the stair that redraws as you type","Riser heights in decimals and to the nearest sixteenth of an inch","Stringer count for cut or solid stringers, with the span checked","Tread boards and screws","Width, run, landing, guard and handrail checks against the AWC deck guide","Working shown for every result","Imperial and metric units"],"offers":{"@type":"Offer","price":"0","priceCurrency":"USD"},"publisher":{"@type":"Organization","@id":"https://decktally.com/#organization","name":"DeckTally","url":"https://decktally.com/","description":"Free deck building calculators that show the working behind every number and cite the code, guide or standard each figure comes from.","logo":{"@type":"ImageObject","url":"https://decktally.com/icons/512.png","width":512,"height":512}}}
{"@context":"https://schema.org","@type":"FAQPage","mainEntity":[{"@type":"Question","name":"How many steps do I need for a 3 ft (36-inch) high deck?","acceptedAnswer":{"@type":"Answer","text":"5 risers and 4 treads: 36 ÷ 7.75 = 4.65, rounded up to 5, so each riser is 7.2 inches. A 30-inch deck takes 4 risers of 7.5 inches, a 48-inch deck 7 of 6.86 inches, and a 60-inch deck 8 of 7.5 inches."}},{"@type":"Question","name":"What is the maximum riser height for deck stairs?","acceptedAnswer":{"@type":"Answer","text":"7.75 inches, with no riser differing from another by more than 0.38 inch, under the American Wood Council's deck guide and IRC R311.7. The tread must run at least 10 inches, measured as the IRC measures tread depth, from the face of one riser to the next, with a nosing of 0.75 to 1.25 inch, and an open riser may not pass a 4-inch sphere."}},{"@type":"Question","name":"How long should stair stringers be?","acceptedAnswer":{"@type":"Answer","text":"The diagonal of the total rise and the total run: for the 36-inch example, √(36² + 40²) = 4 ft 5.81 in, so 4 ft 6 in of stock before the cuts at the top and bottom. A 48-inch rise with an 11-inch run gives 7 risers, a 5 ft 6 in run and a 6 ft 10 in stringer. Stringers must be 2 × 12, and a cut stringer may span only 6 ft horizontally, a solid one 13 ft 3 in, before it needs a post or a landing."}},{"@type":"Question","name":"How do I lay out and cut a stair stringer?","acceptedAnswer":{"@type":"Answer","text":"Mark the riser height on one arm of a framing square and the run on the other, then step the square down a 2 × 12 once for each tread. For the 36-inch example each notch is 7.2 inches (about 7 3/16 in) of rise by 10 inches of run. Cut the bottom of the stringer shorter by the tread thickness: 7.2 − 1.5 = 5.7 inches (about 5 11/16 in) from the landing to the first notch, so the first finished step matches the rest. A cut stringer must keep at least 5 inches of wood below the notches."}},{"@type":"Question","name":"What angle are deck stairs?","acceptedAnswer":{"@type":"Answer","text":"The angle whose tangent is the riser height over the run. The 36-inch example, with 7.2-inch risers and a 10-inch run, is pitched at 35.8°. The steepest stair the limits allow, a 7.75-inch riser over a 10-inch run, is 37.8°; a deeper run makes it shallower, and a 48-inch rise with an 11-inch run comes to 31.9°."}},{"@type":"Question","name":"How many stringers do deck stairs need?","acceptedAnswer":{"@type":"Answer","text":"At least 3 cut stringers, spaced no more than 18 inches apart, so a 36-inch stair takes 3 and a 48-inch stair takes 4. Solid stringers carrying the treads on 2 × 4 cleats may be 36 inches apart, so a 36-inch stair takes 2, but the guide's Table 6 then asks for thicker treads: 2 × 8 for Southern Pine; 2 × 8 or 3 × 4 for Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir; 2 × 10 or 3 × 4 for Redwood, Western Cedars, Ponderosa Pine, Red Pine. On cut stringers any group may use 2 × 4 or 5/4 boards."}},{"@type":"Question","name":"How wide do deck stairs have to be?","acceptedAnswer":{"@type":"Answer","text":"At least 36 inches, and any landing at least as wide as the stair and 36 inches in the direction of travel. A rise of more than 12 ft needs an intermediate landing."}},{"@type":"Question","name":"Do deck stairs need a handrail or a guard?","acceptedAnswer":{"@type":"Answer","text":"A handrail on at least one side once there are 4 or more risers, 34 to 38 inches above the tread nosings, and a stair guard once the total rise is 30 inches or more. The guide gives that threshold twice: its stair figure (Figure 30) says a total rise of 30 inches or more, while its Guard Requirements and IRC R312.1.1 say more than 30 inches above grade, so at exactly 30 inches ask your building department. The 36-inch example needs both; a 30-inch rise with 4 risers needs a guard and a handrail."}}]}
{"@context":"https://schema.org","@type":"BreadcrumbList","@id":"https://decktally.com/deck-stair-calculator/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https://decktally.com/"},{"@type":"ListItem","position":2,"name":"Deck Stair Stringer Calculator","item":"https://decktally.com/deck-stair-calculator/"}]}
```
