Deck Cost Calculator

To estimate what a deck's materials cost, count the boards, joists and screws the way the deck lumber calculator does, then multiply each count by the price your supplier quotes and add them up. This page holds no price list: every figure comes from the prices you enter. With the 16 × 12 ft example and round prices chosen only to show the arithmetic, 30.00 a board, 20.00 a joist and 0.10 a screw, 29 boards come to 870.00, 13 joists to 260.00 and 676 screws to 67.60: 1,197.60, or 6.24 per square foot.

Units

Boards run along this side.

Actual width: a nominal 6-inch board is 5.5 in (140 mm).

Center to center.

0 to 25%.

Optional. Any currency.

Optional. One joist is as long as the deck is wide.

Optional. Box price ÷ screws in the box.

Your materials

Results update as you type.

Deck boards
—
29 boards
Joists
—
13 joists
Screws
—
676 screws

How it adds up

  1. Deck boards —

    29 boards. Enter a price to cost this line.

  2. Joists —

    13 joists. Enter a price to cost this line.

  3. Screws —

    676 screws. Enter a price to cost this line.

  4. Total of priced lines —

    Enter at least one price to see a total.

  5. Cost per sq ft —

    Enter at least one price to see a total.

Estimates only. Results come from the formulas listed below and use no outside data. Check local building codes and your supplier before buying.

Embed this calculator on your site

Paste this where you want the calculator. It is free, shows no ads, works in any site, and links back to this page. Change the height to suit your layout.

What do I need to enter?

  1. The deck and board sizes, exactly as in the deck lumber calculator; the counts are the same.
  2. What your supplier charges for one deck board of the length you chose, one joist as long as the deck is wide, and one screw.
  3. Leave any price blank to leave that line out; the total says how many lines it covers.

How is the deck cost estimate built?

Assumptions

Worked example

The 16 × 12 ft example priced at 30.00 a board, 20.00 a joist and 0.10 a screw. These are round numbers chosen to show the arithmetic, not prices from any supplier.

What does this calculator leave out?

FAQ

How much does a deck cost per square foot?

It depends entirely on your prices, so this calculator works it out from them rather than quoting a figure. With made-up round prices of 30.00 a board, 20.00 a joist and 0.10 a screw, chosen only to show the arithmetic, the 16 × 12 ft example comes to 1,197.60 for 192 sq ft, or 6.24 per square foot for boards, joists and screws. Replace those with a quote from your supplier and the answer updates.

How do I calculate the price of a deck or a deck replacement?

Count the materials, then multiply each count by the price your supplier quotes: boards, joists and screws here, with the railing, stair and joist calculators for the rest. Replacing the boards on an existing frame is the same sum with the joists left unpriced, which this page allows: leave the joist price blank and the total covers the boards and screws alone.

What does the deck cost estimate include?

Deck boards including the waste allowance, joists at the spacing you choose, and the screws to fasten the boards, each at the price you enter. It leaves out beams, posts, footings, hangers, the ledger, railings, stairs, finish, delivery, tax and labour. Use the joist, screw, railing and stair calculators for those counts and price them the same way.

Why does the calculator not include prices?

Because any price it carried would be wrong for most readers most of the time: lumber prices move by region, species, grade and season. A count is a fact of geometry and a price is a fact of your market, so the calculator does the first and asks you for the second. Enter a price for one line and it totals that line alone.

How do I price screws?

Divide the box price by the number of screws in the box. As pure arithmetic, not a price, a box of 350 at 35.00 would be 0.10 a screw. The deck screw calculator counts boxes directly if you prefer.

How many deck boards and joists does the estimate price?

The same counts the deck lumber calculator gives for the same inputs: the 16 × 12 ft example needs 29 boards 16 ft long with 10% waste, 13 joists at 16 inches and 676 screws. Open that calculator to see the working behind each count.

Should I add anything to the total?

Yes: the framing below the joists, the railing if the deck is more than 30 inches above grade, stairs, hangers and hardware, stain or sealer, delivery and tax. Each of those is a separate count on this site, and your supplier's prices do the rest.

This page has no sources section because it states no figure of its own: every count comes from the deck lumber calculator, which lists its sources, and every price from you. The About page explains who runs DeckTally and how to report a mistake.

More deck calculators

Last reviewed . Built and checked by Hassan Razeen.