Deck Joist Span Calculator
To work out deck joists, divide the deck length by the joist spacing, round up and add one for the last joist, then check the span, from the face of the ledger or beam to the face of the beam, against the allowable span for your joist size, species and spacing in the American Wood Council's deck guide. A deck 16 ft along the house with joists spanning 10 ft needs 13 joists (2 × 8 Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir joists at 16 inches), 13 joist hangers and 1 rim joist 16 ft long, 146 linear feet of lumber in all, and the table allows that joist to span 11 ft 1 in.
Your materials
Results update as you type.
- Joists
- 13 joists
- 10 ft long
- Allowable span
- 11 ft 1 in
- Your 10 ft span is within it by 1 ft 1 in.
- Joist lumber
- 146 linear ft
- 2 × 8
How it adds up
-
Joists 13 joists
192 in of deck length ÷ 16 in spacing = 12 12 + 1 for the far end = 13
-
Allowable span 11 ft 1 in
DCA 6 Table 2 for 2 × 8, Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir, 16 in on center: 11 ft 1 in
-
Allowable overhang 1 ft 10 in
Table 2 allows 1 ft 10 in; a quarter of the 10 ft span is 2 ft 6 in The lesser of the two = 1 ft 10 in Only where the joists bear on the beam, are fastened to it against uplift, and are blocked between joists at the beam (DCA 6)
-
Joist hangers 13 hangers
One per joist at the ledger: 13
-
Rim joists 1 rim joist
One across the far ends of the joists; the ledger closes the house side.
-
Joist lumber 146 linear ft
13 joists × 10 ft = 130 ft 1 rim joist × 16 ft = 16 ft 130 ft + 16 ft = 146 ft
Estimates only. Results come from the formulas listed below and use no outside data. Check local building codes and your supplier before buying.
Your frame, from above
- Ledger on the house, a hanger at each joist
- 13 joists, 16 in apart
- Beam 10 ft out, no overhang
How do I use the joist calculator?
- Enter the joist span: from the face of the ledger or beam to the face of the beam, without any overhang.
- Enter the deck length, the side the joists are spaced along.
- Pick the joist size, the lumber species group and the spacing, center to center.
- Say whether the deck hangs from a ledger on the house or stands on its own.
- Add an overhang if the joists run past the beam.
The allowable span and overhang come straight from the American Wood Council's DCA 6 Table 2, and the result says whether your span is within them.
Where does each number come from?
- Joists: the deck length divided by the joist spacing, rounded up, plus one for the far end, as on the lumber calculator.
- Joist length: the span plus the overhang.
- Allowable span: read from DCA 6 Table 2 for the joist size, species group and spacing. Your span must be no more than it.
- Allowable overhang: the lesser of the table's overhang and a quarter of your span, and only where the joists bear on the beam, are fastened to it against uplift and are blocked between joists at the beam.
- Hangers: one per joist at the ledger, assuming the joists bear on the beam at the other end. None on a freestanding deck.
- Rim joists: one across the far end of an attached deck, one at each end of a freestanding deck.
- Joist lumber: joists × joist length, plus rim joists × deck length, in linear feet.
Assumptions
- Joists are counted as the deck length divided by the spacing, rounded up, plus one for the far end: 192 ÷ 16 = 12, so 13. Doubled joists under a parting board and the extra joists stairs or a hot tub need are not counted.
- The span check is a lookup in DCA 6 Table 2, nothing more. It covers four joist sizes, three species groups, No. 2 grade and a 40 psf live load; other grades, snow loads, hot tubs and joists longer than 18 ft including the overhang are outside it and need an engineer or your building department. The ledger must be at least a 2 × 8, as must any joist or rim joist a guard post attaches to.
- Each joist is as long as the span plus the overhang, so 10 ft here. Buy the next stock length your yard carries.
- An attached deck gets one rim joist and a hanger per joist at the ledger, assuming the joists bear on the beam at the other end; joists hung from the side of the beam need a hanger there too. A freestanding deck gets two rim joists and no ledger hangers. The ledger itself, beams, posts, footings and blocking are not counted.
Worked example
A deck 16 ft along the house, joists spanning 10 ft, 2 × 8 Douglas Fir-Larch group at 16 inches, attached, no overhang:
- Joists: 13 joists, 10 ft long 192 in of deck length ÷ 16 in spacing = 12 12 + 1 for the far end = 13
- Allowable span: 11 ft 1 in, Your 10 ft span is within it by 1 ft 1 in. DCA 6 Table 2 for 2 × 8, Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir, 16 in on center: 11 ft 1 in
- Allowable overhang: 1 ft 10 in, No overhang entered. Table 2 allows 1 ft 10 in; a quarter of the 10 ft span is 2 ft 6 in The lesser of the two = 1 ft 10 in Only where the joists bear on the beam, are fastened to it against uplift, and are blocked between joists at the beam (DCA 6)
- Joist hangers: 13 hangers One per joist at the ledger: 13
- Rim joists: 1 rim joist, 16 ft long One across the far ends of the joists; the ledger closes the house side.
- Joist lumber: 146 linear ft, 2 × 8 13 joists × 10 ft = 130 ft 1 rim joist × 16 ft = 16 ft 130 ft + 16 ft = 146 ft
Deck joist span table
DCA 6 Table 2, "Maximum Joist Spans and Overhangs", which Table R507.6 of the 2021 International Residential Code matches. Spans are face of support to face of support; overhangs are also capped at a quarter of the actual span. Conditions: 40 psf live load, 10 psf dead load, No. 2 grade lumber, wet service conditions and L/360 deflection; incising assumed for Douglas Fir-Larch, Hem-Fir and Spruce-Pine-Fir; the Redwood group is rated as northern species without incising. Joist length, span plus overhang, is limited to 18 ft; an overhang may not exceed a quarter of the actual span and is allowed only where the joists bear on the beam, are fastened against uplift and are blocked at the beam; and the ledger, and any joist or rim joist a guard post attaches to, must be at least a 2 × 8.
| Species | Size | Allowable span, joists at | Allowable overhang, joists at | ||||
|---|---|---|---|---|---|---|---|
| 12 in | 16 in | 24 in | 12 in | 16 in | 24 in | ||
| Southern Pine | 2 × 6 | 9 ft 11 in | 9 ft | 7 ft 7 in | 1 ft | 1 ft 1 in | 1 ft 3 in |
| Southern Pine | 2 × 8 | 13 ft 1 in | 11 ft 10 in | 9 ft 8 in | 1 ft 10 in | 2 ft | 2 ft 4 in |
| Southern Pine | 2 × 10 | 16 ft 2 in | 14 ft | 11 ft 5 in | 3 ft 1 in | 3 ft 5 in | 2 ft 10 in |
| Southern Pine | 2 × 12 | 18 ft | 16 ft 6 in | 13 ft 6 in | 4 ft 6 in | 4 ft 2 in | 3 ft 4 in |
| Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir | 2 × 6 | 9 ft 6 in | 8 ft 4 in | 6 ft 10 in | 11 in | 1 ft | 1 ft 2 in |
| Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir | 2 × 8 | 12 ft 6 in | 11 ft 1 in | 9 ft 1 in | 1 ft 8 in | 1 ft 10 in | 2 ft 2 in |
| Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir | 2 × 10 | 15 ft 8 in | 13 ft 7 in | 11 ft 1 in | 2 ft 10 in | 3 ft 2 in | 2 ft 9 in |
| Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir | 2 × 12 | 18 ft | 15 ft 9 in | 12 ft 10 in | 4 ft 4 in | 3 ft 11 in | 3 ft 3 in |
| Redwood, Western Cedars, Ponderosa Pine, Red Pine | 2 × 6 | 8 ft 10 in | 8 ft | 6 ft 10 in | 9 in | 10 in | 11 in |
| Redwood, Western Cedars, Ponderosa Pine, Red Pine | 2 × 8 | 11 ft 8 in | 10 ft 7 in | 8 ft 8 in | 1 ft 5 in | 1 ft 7 in | 1 ft 9 in |
| Redwood, Western Cedars, Ponderosa Pine, Red Pine | 2 × 10 | 14 ft 11 in | 13 ft | 10 ft 7 in | 2 ft 5 in | 2 ft 7 in | 2 ft 8 in |
| Redwood, Western Cedars, Ponderosa Pine, Red Pine | 2 × 12 | 17 ft 5 in | 15 ft 1 in | 12 ft 4 in | 3 ft 7 in | 3 ft 9 in | 3 ft 1 in |
What does this calculator leave out?
- Posts, footings and the ledger itself. DCA 6 has tables for each, and the deck beam span calculator sizes the beam.
- Blocking, doubled joists and the extra joists a hot tub or a parting board needs. Stairs have their own calculator.
- Lumber grades other than No. 2, snow loads, and joists longer than 18 ft including the overhang.
- The ledger's own size and fastening: DCA 6 requires at least a 2 × 8 and gives the bolt and screw schedules.
- Composite or engineered joists: use the maker's span tables.
- Local amendments to the code. Your building department has the final say.
FAQ
How far can a 2x8 deck joist span?
At 16 inches on center, a 2 × 8 deck joist can span 11 ft 10 in for Southern Pine, 11 ft 1 in for Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir and 10 ft 7 in for Redwood, Western Cedars, Ponderosa Pine, Red Pine, under DCA 6 Table 2, which the 2021 IRC's Table R507.6 matches. At 12 inches it is 13 ft 1 in for Southern Pine, 12 ft 6 in for Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir and 11 ft 8 in for Redwood, Western Cedars, Ponderosa Pine, Red Pine; at 24 inches it is 9 ft 8 in for Southern Pine, 9 ft 1 in for Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir and 8 ft 8 in for Redwood, Western Cedars, Ponderosa Pine, Red Pine. The spans assume No. 2 grade, a 40 psf live load and wet service, and are measured face of support to face of support without the overhang.
What size joist do I need for a 12 ft span?
At 16 inches on center, a 12 ft span needs a 2 × 10 for Southern Pine, a 2 × 10 for Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir and a 2 × 10 for Redwood, Western Cedars, Ponderosa Pine, Red Pine. At 24 inches it needs a 2 × 12 for Southern Pine, a 2 × 12 for Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir and a 2 × 12 for Redwood, Western Cedars, Ponderosa Pine, Red Pine, and at 12 inches a 2 × 8 for Southern Pine, a 2 × 8 for Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir and a 2 × 10 for Redwood, Western Cedars, Ponderosa Pine, Red Pine. A 2 × 8 of the Douglas Fir-Larch group at 16 inches is rated for 11 ft 1 in, so a 12 ft span exceeds it by 11 in.
How many joists do I need for a 12x16 deck?
With the joists spanning 12 ft and spaced along the 16 ft side, a 12 × 16 deck needs 13 joists at 16 inches (192 ÷ 16 = 12, plus one for the far end), 17 at 12 inches or 9 at 24 inches. For a 12 ft span at 16 inches the table needs a 2 × 10 for Southern Pine, a 2 × 10 for Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir and a 2 × 10 for Redwood, Western Cedars, Ponderosa Pine, Red Pine; an attached deck also needs 13 hangers and one 16 ft rim joist.
How is a deck joist span measured?
DCA 6 measures the span from the face of the support at one end of the joist to the face of the support at the other end, and it does not include the overhang. On an attached deck that is from the face of the ledger to the face of the beam. The allowable span in the table must be at least that distance; the overhang is checked separately.
How far can deck joists overhang the beam?
The lesser of the overhang in DCA 6 Table 2 and a quarter of the actual joist span. For 2 × 8 Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir joists at 16 inches spanning 10 ft, the table allows 1 ft 10 in and a quarter of the span is 2 ft 6 in, so the limit is 1 ft 10 in. DCA 6 allows the overhang only where the joists bear on the beam, are fastened to it against uplift, and are blocked between joists at the beam; joists can instead hang from the side of the beam with no overhang.
Should deck joists be 12, 16 or 24 inches apart?
The decking decides the spacing: the code and the board maker set a maximum for each decking thickness and layout, and the deck lumber calculator's FAQ quotes the 2021 IRC and Trex limits. Wider spacing then shortens the allowable span: 2 × 8 Douglas Fir-Larch, Hem-Fir, Spruce-Pine-Fir joists span 12 ft 6 in at 12 inches, 11 ft 1 in at 16 and 9 ft 1 in at 24. Closer joists mean more joists and more screws but let a smaller size make the span.
The deck lumber calculator counts the boards and screws that go on top of these joists.
Sources
The counts are arithmetic. Every span, overhang and connection rule on this page comes from these publications. Follow them and your local building code over this page where they differ.
- DCA 6: Prescriptive Residential Wood Deck Construction Guide (2015), Table 2 and the joist and hanger sections, American Wood Council. Every allowable span and overhang in the table (40 psf live load, 10 psf dead load, No. 2 grade, wet service, L/360 deflection); the 18 ft joist limit; the overhang limit of a quarter of the span; the 2 × 8 minimum for a ledger; how a span is measured; joists hung from the ledger or beam on hangers at least 60% of the ledger or beam depth.
- 2021 International Residential Code, Section R507.6 and Table R507.6 (deck joist spans), International Code Council. The same joist spans as adopted into the model code. Local amendments can differ, so check your building department.
Every publication the site cites is listed on the methodology page, with how the numbers are computed and checked. Found a mistake? Send a correction. The About page explains who runs DeckTally.
More deck calculators
- Deck materials list
One list for the whole deck: decking, joists, beam, posts, footings and screws.
- Deck lumber calculator
Deck lumber and wood: boards, joists and screws for a rectangular deck, with optional cost.
- Deck beam calculator
Allowable beam span from the AWC table and the posts a beam needs.
- Deck footing calculator
Footing size, thickness and concrete from the AWC table, with the tallest post.
- Deck screw calculator
Deck screws or hidden clips, with an allowance and the boxes to buy.
- Deck stair calculator
Risers, treads, stringer length and count, with the code limits checked.
- Deck railing calculator
Posts, balusters, rails, cap and fasteners, with the gap checked.
- Deck cost calculator
Boards, joists and screws priced with your own numbers.
- Deck stain calculator
Gallons and cans from the coverage on your can.
Last reviewed . Built and checked by Hassan Razeen.