Deck Footing Calculator

To size a deck footing, take the spacing of the posts along the beam and the span of the joists the beam carries, and read the footing for your soil in the American Wood Council's deck guide. Posts 8 ft apart under joists spanning 12 ft need a footing 24 in round or 21 × 21 in square, 10 in thick on 1,500 psf soil, and 4 round ones take 10.47 cu ft of concrete (0.39 cu yd). The bottom of every footing sits at least 12 inches below undisturbed ground, or below the frost line where that is deeper.

Units

Post to post: the beam span. Up to 18 ft.

The joists the beam carries. Up to 18 ft.

Your building department knows the value for your site.

For the tallest 6 × 6 post the table allows.

One under each post.

Your materials

Results update as you type.

Footing size
24 in
round, across
Footing thickness
10 in
at least
Concrete
10.47 cu ft
0.39 cu yd, for 4 footings

How it adds up

  1. Footing size 24 in

    Posts 8 ft apart are read on the 8 ft beam-span row, joists spanning 12 ft on its 14 ft line DCA 6 Table 4, 1,500 psf soil: 24 in round or 21 × 21 in square

  2. Footing thickness 10 in

    The same table cell: 10 in thick, for 2,500 psi concrete. Check it against what your post base and its anchor need.

  3. Concrete 10.47 cu ft

    π × (24 in ÷ 2)² × 10 in thick = 2.62 cu ft in each footing × 4 footings = 10.47 cu ft; ÷ 27 = 0.39 cu yd The pad only: a pier or column poured on top of it is extra

  4. Tallest 6 × 6 post 14 ft

    DCA 6 Table 4, Southern Pine: 14 ft from grade or the top of the foundation, whichever is higher, to the underside of the beam. An 8 × 8 post may be used anywhere in the table, to 14 ft.

  5. Depth below grade 12 in or more

    Footings bear on undisturbed soil at least 12 in below the undisturbed ground surface or below the frost line, whichever is deeper. Your building department sets the frost line.

Estimates only. Results come from the formulas listed below and use no outside data. Check local building codes and your supplier before buying.

Your footing, in section

Section through a deck footing 24 in round and 10 in thick, under a 6 × 6 post, its bottom at least 12 in below the ground. 24 in 10 in Depth
  • Footing 24 in round, 10 in thick
  • Depth: 12 in or more below undisturbed ground, or below the frost line if deeper
  • The pad is drawn to scale; the depth is not
Embed this calculator on your site

Paste this where you want the calculator. It is free, shows no ads, works in any site, and links back to this page. Change the height to suit your layout.

What do I need to enter?

  1. The spacing of the posts along the beam, post to post. The deck beam span calculator gives it.
  2. The span of the joists the beam carries, which the deck joist span calculator checks.
  3. The bearing capacity of your soil. Leave it at 1,500 psf unless your building department confirms a higher value.
  4. Round or square footings, the species of the posts, and how many footings you will pour.

How is a deck footing sized?

Assumptions

Worked example

Posts 8 ft apart under joists spanning 12 ft, on 1,500 psf soil, with 4 round footings under Southern Pine posts:

Deck footing size chart

DCA 6 Table 4, "Post Height for 6x6 and Footing Sizes for all Posts", and Commentary Table C4B, "Footing Sizes for Higher Soil Bearing Capacities". Each cell reads round diameter / square side / thickness, in inches. Conditions: 40 psf live load and 10 psf dead load, with the beam and the joists each overhanging by a quarter of their span, No. 2 grade and wet service conditions; 150 pcf concrete with a compressive strength of 2,500 psi. Read your post spacing on the first beam span at or above it, and your joist span on the first line at or above it. The 1,500 psf column is the guide's Table 4; the others are its Commentary Table C4B.

Deck footing round diameter, square side and thickness in inches, by beam span, joist span and soil bearing capacity
Beam span Joist span Round / square / thickness (in), soil at
1,500 psf2,000 psf2,500 psf3,000 psf
6 ft ≤ 10 ft 18 / 16 / 715 / 13 / 614 / 12 / 612 / 11 / 6
≤ 14 ft 21 / 18 / 818 / 16 / 716 / 14 / 615 / 13 / 6
≤ 18 ft 24 / 21 / 1020 / 18 / 818 / 16 / 716 / 15 / 6
8 ft ≤ 10 ft 20 / 18 / 817 / 15 / 616 / 14 / 614 / 13 / 6
≤ 14 ft 24 / 21 / 1021 / 18 / 818 / 16 / 717 / 15 / 6
≤ 18 ft 27 / 24 / 1123 / 21 / 921 / 18 / 819 / 17 / 7
10 ft ≤ 10 ft 23 / 20 / 919 / 17 / 717 / 15 / 616 / 14 / 6
≤ 14 ft 27 / 24 / 1122 / 21 / 920 / 18 / 819 / 17 / 7
≤ 18 ft 31 / 27 / 1326 / 23 / 1123 / 21 / 921 / 19 / 8
12 ft ≤ 10 ft 25 / 22 / 1021 / 19 / 819 / 17 / 717 / 15 / 6
≤ 14 ft 30 / 26 / 1325 / 22 / 1022 / 20 / 920 / 18 / 8
≤ 18 ft 34 / 30 / 1529 / 26 / 1226 / 23 / 1123 / 21 / 9
14 ft ≤ 10 ft 27 / 24 / 1123 / 21 / 920 / 18 / 819 / 17 / 7
≤ 14 ft 32 / 29 / 1427 / 24 / 1124 / 22 / 1022 / 20 / 9
≤ 18 ft 37 / 33 / 1631 / 28 / 1328 / 24 / 1225 / 22 / 10
16 ft ≤ 10 ft 29 / 26 / 1225 / 22 / 1022 / 19 / 920 / 18 / 8
≤ 14 ft 35 / 31 / 1529 / 26 / 1226 / 23 / 1124 / 21 / 10
≤ 18 ft 40 / 35 / 1833 / 30 / 1430 / 26 / 1327 / 24 / 11
18 ft ≤ 10 ft 31 / 27 / 1326 / 23 / 1123 / 21 / 921 / 19 / 8
≤ 14 ft 37 / 33 / 1631 / 28 / 1328 / 24 / 1225 / 22 / 10
≤ 18 ft 42 / 37 / 1936 / 32 / 1631 / 28 / 1328 / 25 / 12

How tall can a deck post be?

The tallest 6 × 6 post from the same Table 4, measured from grade or the top of the foundation, whichever is higher, to the underside of the beam. "NP" means a 6 × 6 post of that species is not permitted at those spans. An 8 × 8 post may be used anywhere in the table, to 14 ft. Incising is assumed for Douglas Fir-Larch, Hem-Fir and Spruce-Pine-Fir.

Tallest 6 by 6 deck post by beam span, joist span and species
Beam span Joist span Southern PineDouglas Fir-LarchHem-Fir, Western CedarsRedwoodPonderosa Pine, Red Pine, SPF
6 ft ≤ 10 ft 14 ft14 ft14 ft14 ft14 ft
≤ 14 ft 14 ft14 ft14 ft14 ft14 ft
≤ 18 ft 14 ft14 ft12 ft14 ft11 ft
8 ft ≤ 10 ft 14 ft14 ft14 ft14 ft14 ft
≤ 14 ft 14 ft14 ft14 ft14 ft11 ft
≤ 18 ft 14 ft13 ft11 ft12 ft8 ft
10 ft ≤ 10 ft 14 ft14 ft14 ft14 ft12 ft
≤ 14 ft 14 ft13 ft11 ft13 ft8 ft
≤ 18 ft 12 ft11 ft8 ft11 ft2 ft
12 ft ≤ 10 ft 14 ft14 ft12 ft14 ft10 ft
≤ 14 ft 13 ft12 ft9 ft11 ft5 ft
≤ 18 ft 11 ft9 ft6 ft9 ft2 ft
14 ft ≤ 10 ft 14 ft13 ft11 ft13 ft8 ft
≤ 14 ft 11 ft10 ft7 ft10 ft2 ft
≤ 18 ft 9 ft8 ft2 ft8 ftNP
16 ft ≤ 10 ft 13 ft12 ft10 ft12 ft6 ft
≤ 14 ft 10 ft9 ft5 ft9 ft2 ft
≤ 18 ft 7 ft5 ft2 ft7 ftNP
18 ft ≤ 10 ft 12 ft11 ft8 ft11 ft2 ft
≤ 14 ft 9 ft8 ft2 ft8 ftNP
≤ 18 ft 5 ft2 ft2 ft6 ftNP

What are the code requirements for deck footings?

From the American Wood Council's deck guide, which cites IRC R403. Your local code may amend them.

What does this calculator leave out?

FAQ

How big should a deck footing be?

It depends on how much deck each post carries and on the soil. On 1,500 psf soil, DCA 6 Table 4 runs from 18 in round or 16 × 16 in square, 7 in thick for posts 6 ft apart under joists up to 10 ft, to 42 in round or 37 × 37 in square, 19 in thick for posts 18 ft apart under 18 ft joists. The example on this page, posts 8 ft apart under 12 ft joists, takes 24 in round or 21 × 21 in square, 10 in thick.

How deep do deck footings need to be?

At least 12 inches below the undisturbed ground surface, or below the frost line, whichever is deeper, bearing on undisturbed soil. Your building department sets the frost line for your area. A deck footing closer than 5 ft to the house foundation wall must bear at the same elevation as the house footing.

How much concrete do I need for deck footings?

The plan area of the footing times its thickness, times the number of footings. The example's round footing is π × (24 ÷ 2)² × 10 in = 2.62 cu ft, so 4 take 10.47 cu ft, or 0.39 cu yd. Poured square at 21 × 21 in, each takes 2.55 cu ft. That is the pad only; a pier on top of it is extra, and the bag or the supplier tells you how far a bag or a yard goes.

Does better soil mean a smaller footing?

Yes. The same posts and joists on 3,000 psf soil need 17 in round or 15 × 15 in square, 6 in thick, against 24 in round or 21 × 21 in square, 10 in thick on 1,500 psf. The guide's main table assumes 1,500 psf, the lowest value it covers; use a stronger column only when your building department confirms the soil.

How tall can a 6×6 deck post be?

Up to 14 ft, less as the post carries more deck, and less for some species than others. For the example, Table 4 allows a Southern Pine post 14 ft high; with posts 12 ft apart under 14 ft joists, a Ponderosa Pine, Red Pine, SPF post is limited to 5 ft. Where the table says "NP" a 6 × 6 post of that species is not permitted. Posts must be 6 × 6 or larger, and an 8 × 8 may be used anywhere in the table, to 14 ft.

How many footings does a deck need?

One under every post. The posts follow from the beam: its length divided by its allowable span, rounded up, plus one. The deck beam span calculator on this site counts them, and a freestanding deck has a second beam, with its own posts, at the house side.

The deck beam span calculator spaces the posts these footings sit under, and the deck joist span calculator checks the joists above them.

Sources

The counts are arithmetic. Every footing size and post height on this page comes from these publications. Follow them and your local building code over this page where they differ.

Every publication the site cites is listed on the methodology page, with how the numbers are computed and checked. Found a mistake? Send a correction. The About page explains who runs DeckTally.

More deck calculators

Last reviewed . Built and checked by Hassan Razeen.