Deck Stain Calculator
To work out how much deck stain to buy, multiply the deck's length by its width, add any railings, stairs or fascia you will coat, multiply by the number of coats, and divide by the coverage printed on the can. The coverage is the one number this page cannot know: it is the maker's figure for the maker's product, so you enter it from the label. A 16 × 12 ft deck with 40 sq ft of railing is 232 sq ft; two coats make 464 sq ft of coating, and if the can says 250 sq ft per gallon that is 1.86 gallons, so 2 gallon cans.
Your materials
Results update as you type.
- Area × coats
- 384 sq ft
- 2 coats
- Stain needed
- —
- Enter the coverage from the can to see how much to buy.
- To buy
- —
- Enter the coverage from the can to see how much to buy.
- Stain cost
- —
- Enter the coverage from the can to see how much to buy.
How it adds up
-
Area to coat 192 sq ft
16 ft × 12 ft = 192 sq ft
-
Area × coats 384 sq ft
192 sq ft × 2 coats = 384 sq ft
-
Stain needed —
Enter the coverage from the can to see how much to buy.
-
To buy —
Enter the coverage from the can to see how much to buy.
-
Stain cost —
Enter the coverage from the can to see how much to buy.
Estimates only. Results come from the formulas listed below and use no outside data. Check local building codes and your supplier before buying.
What do I need to enter?
- The deck's length and width.
- Any extra area you will coat: railings, stairs, fascia, benches. Zero if none.
- How many coats the can calls for.
- The coverage printed on the can, in square feet per gallon for one coat.
- Whether you will buy quarts, gallons or five-gallon pails, and what one costs if you want the stain priced.
How much stain does a deck need?
- Area: length × width, plus the extra area.
- Area × coats: every coat covers the whole area again.
- Gallons: that area ÷ the can's coverage per gallon.
- To buy: gallons ÷ the container size, rounded up. Cost: containers × your price for one.
Assumptions
- The deck area is length times width, the flat surface only. Anything else you will coat, such as railings, stairs, fascia or benches, goes in as extra area, measured by you.
- Coverage per gallon is taken from the can, for one coat, and applied to every coat alike. If the label gives a range, the lower figure yields more stain; which figure fits your wood is the maker's call, not this page's. The 250 sq ft per gallon in the example is a number chosen to show the arithmetic.
- The number of cans rounds up to whole containers of the size you pick. A quart is a quarter gallon and a pail five gallons. Metric volumes are converted from US gallons. The cost is those containers times the price you enter; refinishing also means cleaning and perhaps sanding, which this page does not price.
Worked example
A 16 × 12 ft deck with 40 sq ft of railing, 2 coats, bought by the gallon, with a can that says 250 sq ft per gallon. The coverage is a figure chosen to show the arithmetic; read your own can.
- Area: 232 sq ft16 × 12 = 192, + 40 extra
- Area × coats: 464 sq ft232 × 2
- Stain: 1.86 gallons464 ÷ 250 per gallon
- To buy: 2 gallon cans1.86 rounded up to whole cans
What does this calculator leave out?
- A coverage rate of its own, and any product recommendation.
- Anything beyond the flat deck surface, unless you add it as extra area.
- Cleaner, brightener, brushes and the stain lost in the roller tray.
- The railing's own area, which you add yourself: the deck railing calculator gives the baluster and rail counts to measure from.
FAQ
How much stain do I need for a 16×12 deck?
192 sq ft of surface, so 384 sq ft of coating for two coats. The gallons depend on your can: at an illustrative 250 sq ft per gallon, a figure chosen for the arithmetic and not taken from any product, that would be 1.54 gallons, or 2 gallon cans. Read your can's own coverage and enter it: the gallons scale with it exactly.
How many square feet does a gallon of deck stain cover?
Whatever the can says, and nothing on this page can tell you otherwise: the coverage is the maker's figure for that product. Enter the label's number here, the lower one if it gives a range, and the calculator does the division.
How many coats of stain does a deck need?
The number the can calls for. With the example's illustrative 250 sq ft per gallon, 2 coats need 1.86 gallons and one coat 0.93. Every coat is counted over the full area, so doubling the coats doubles the stain.
Do I count the railings?
Only if you will stain them. Measure the area you will actually coat and add it as extra area. The example adds 40 sq ft, which at its illustrative coverage raises the order from 1.54 to 1.86 gallons.
Should I buy quarts, gallons or a pail?
Whichever rounds up least: at its illustrative coverage the example needs 1.86 gallons, which is 2 gallon cans, 8 quarts, or one five-gallon pail with most of it left over. Pick the container in the form and the count changes.
How much does it cost to stain or refinish a deck?
For the stain itself, the containers you need times what your store charges for one: enter the price per can or pail and the calculator shows it. This page carries no prices, because they differ by product and shop, and it does not price the cleaning, brightening or sanding that refinishing a weathered deck usually needs first, or any labour.
Does this calculator suggest a stain?
No. It counts area and divides by the coverage you give it. Which product, how many coats, and how to prepare the wood are the maker's instructions and your choice.
This page has no sources section because it quotes no figure of its own: the coverage is your can's and the area is yours. The deck lumber calculator works out the boards under the stain, and the About page explains who runs DeckTally and how to report a mistake.
More deck calculators
- Deck materials list
One list for the whole deck: decking, joists, beam, posts, footings and screws.
- Deck lumber calculator
Deck lumber and wood: boards, joists and screws for a rectangular deck, with optional cost.
- Deck joist calculator
Joist count, span check against the AWC table, hangers and rim joists.
- Deck beam calculator
Allowable beam span from the AWC table and the posts a beam needs.
- Deck footing calculator
Footing size, thickness and concrete from the AWC table, with the tallest post.
- Deck screw calculator
Deck screws or hidden clips, with an allowance and the boxes to buy.
- Deck stair calculator
Risers, treads, stringer length and count, with the code limits checked.
- Deck railing calculator
Posts, balusters, rails, cap and fasteners, with the gap checked.
- Deck cost calculator
Boards, joists and screws priced with your own numbers.
Last reviewed . Built and checked by Hassan Razeen.