Deck Lumber and Wood Calculator

A 16 × 12 ft deck with 5.5-inch boards and a 0.25-inch gap needs 29 boards 16 ft long, 13 joists at 16 inches and 676 screws. Rows, linear feet, waste and boards to buy are plain arithmetic shown step by step; the fastening and joist spacing follow the American Wood Council's deck guide (DCA 6) and the IRC.

Units

Boards run along this side.

Actual width: a nominal 6-inch board is 5.5 in (140 mm).

Center to center.

0 to 25%.

Optional. Any currency.

Your materials

Results update as you type.

Boards to buy
29 boards
16 ft long
Joists
13 joists
12 ft long
Deck screws
676 screws
Board cost
—
Add a price per board to see the cost.

How it adds up

  1. Deck area 192 sq ft

    16 ft × 12 ft = 192 sq ft

  2. Rows of boards 26 rows

    Each row: 5.5 in board + 0.25 in gap = 5.75 in 144 in of deck width ÷ 5.75 in = 25.04, rounded up to 26

  3. Decking needed 416 linear ft

    26 rows × 16 ft = 416 ft

  4. Boards to buy 29 boards

    416 ft × 1.10 (10% waste) = 457.6 ft 457.6 ft ÷ 16 ft per board = 28.6, rounded up to 29

  5. Joists 13 joists

    192 in of deck length ÷ 16 in spacing = 12 12 + 1 for the far end = 13

  6. Deck screws 676 screws

    26 rows × 13 joists × 2 screws per crossing = 676

  7. Board cost —

    Add a price per board to see the cost.

Estimates only. Results come from the formulas listed below and use no outside data. Check local building codes and your supplier before buying.

Your deck

Plan of a deck 16 ft long and 12 ft wide, with 26 rows of boards and 13 joists. Length 16 ft Width 12 ft
  • 26 rows of boards, running along the length
  • 13 joists, 16 in apart
Embed this calculator on your site

Paste this where you want the calculator. It is free, shows no ads, works in any site, and links back to this page. Change the height to suit your layout.

How do I use the deck lumber calculator?

This deck lumber calculator works for any rectangular deck with the boards laid straight, whatever the wood: pressure-treated pine, cedar, redwood, hardwood or composite all count the same once you enter the actual board width. Switch to metric and it is a decking board calculator in millimetres and metres, for UK, Irish and Australian board sizes.

  1. Measure the deck. Enter the side the boards run along as the length, and the other side as the width.
  2. Enter the actual width of your deck boards and the gap you will leave between them.
  3. Pick the board length you will buy and how far apart your joists are, measured center to center.
  4. Set a waste allowance. The default is 10%.
  5. Add a price per board if you want a cost estimate.

The results update as you type, and each one shows the sum behind it. Switch to metric at the top of the form if you measure in meters and millimeters. The page address updates too, so you can bookmark or share your numbers.

How are deck boards, joists and screws calculated?

To estimate deck materials, divide the deck width by one board width plus one gap and round up to get the rows of boards, multiply the rows by the deck length to get linear feet, add waste, and divide by the length of board you will buy.

Assumptions

Rules of thumb

Worked example

A 16 × 12 ft deck with 5.5-inch boards and a 0.25-inch gap, 16 ft boards, joists at 16 inches and 10% waste:

So you would buy 29 boards, 13 joists and 676 screws.

How many deck boards by deck size

With 5.5-inch boards and a 0.25-inch gap, 16 ft boards, joists at 16 inches and 10% waste, boards running along the longer side. Each size links to its section of the board-count guide, with the working, the count at every board length and what a different waste allowance or joist spacing does to it. Enter your own sizes above for anything else.

Boards, joists and screws for common deck sizes
Deck size Rows Linear ft 16 ft boards Joists Screws
8 × 8 ft 17 136 10 7 238
8 × 10 ft 17 170 12 9 306
10 × 10 ft 21 210 15 9 378
10 × 12 ft 21 252 18 10 420
12 × 12 ft 26 312 22 10 520
12 × 16 ft 26 416 29 13 676
16 × 16 ft 34 544 38 13 884
16 × 20 ft 34 680 47 16 1,088
20 × 20 ft 42 840 58 16 1,344

Common board sizes

Deck boards are sold by a nominal size, but the actual width is smaller. Enter the actual width in the calculator. Wood sizes follow the American Softwood Lumber Standard (PS 20); composite boards vary by maker.

Nominal and actual deck board sizes
Nominal sizeActual widthActual thickness
5/4 × 6 (wood decking) 5.5 in (140 mm) 1 in
2 × 4 3.5 in (89 mm) 1.5 in
2 × 6 5.5 in (140 mm) 1.5 in
2 × 8 7.25 in (184 mm) 1.5 in
1 × 6 composite (Trex and similar) 5.5 in (140 mm) About 1 in; check the maker’s spec

What does this calculator leave out?

FAQ

How much decking do I need?

A 16 × 12 ft deck with 5.5-inch boards and a 0.25-inch gap needs 29 boards 16 ft long, including 10% waste. To work it out, count the rows of boards across the deck: the deck width in inches divided by one board width plus one gap, rounded up (144 ÷ 5.75 = 25.04, so 26 rows). Multiply the rows by the deck length to get linear feet (26 × 16 = 416), add the waste allowance (416 × 1.1 = 457.6), and divide by the length of board you will buy (457.6 ÷ 16 = 28.6, rounded up to 29). The same deck needs 13 joists at 16 inches and 676 screws. Enter your own sizes in the calculator to get the count for your deck.

How many deck boards per square foot?

With 5.5-inch boards and a 0.25-inch gap, each row covers 5.75 inches, so a deck needs about 2.09 linear feet of board per square foot, or about 2.3 linear feet with 10% waste. The number of boards depends on their length: the 192 sq ft worked example needs 29 boards 16 ft long including 10% waste. Plan on about 3.5 deck screws per square foot with joists at 16 inches.

How many deck boards do I need for a 12×12 deck?

A 12 × 12 ft deck with 5.5-inch boards and a 0.25-inch gap needs 26 rows of boards, or 312 linear feet. With 10% waste that is 29 boards 12 ft long, or 22 boards 16 ft long. With joists at 16 inches it also needs 10 joists and 520 screws.

How far apart should deck joists be?

Closer spacing means more joists: a 16 × 12 ft deck needs 17 joists at 12 inches, 13 at 16 inches and 9 at 24 inches. Joist spacing is measured from the center of one joist to the center of the next, and this calculator lets you choose 12, 16 or 24 inches. The 2021 International Residential Code (Table R507.7) allows 1.25-inch wood decking at 16 inches when the boards run across the joists and rest on three or more of them, and 12 inches when they run diagonally; 2-inch wood decking is allowed at 24 inches. Trex's installation guide gives 16 inches for its 1-inch composite boards on a residential deck, 12 inches at a 45-degree angle, and 12 inches on commercial decks. This calculator does not set a safe spacing: that depends on your decking and local building code, so check the board maker's instructions and your building department before you choose.

How much waste should I allow for decking?

This calculator adds 10% by default and lets you set anything from 0% to 25%. Waste covers offcuts, damaged boards and cutting mistakes. TimberTech's installation guide recommends adding roughly 10% to the board count as a scrap factor, Fine Homebuilding advises 10% for boards laid straight across the joists and 15% for boards laid at 45 degrees, and Decks.com notes that patterns such as herringbone can waste up to 20%. A picture-frame border adds mitred cuts at every corner, so allow the higher figure for it too. On the 16 × 12 ft example, 10% waste raises the order from 26 boards to 29, and 15% raises it to 30.

How many screws do I need for a deck?

A 16 × 12 ft deck needs 676 screws at 2 per board-and-joist crossing: it has 26 rows and 13 joists, and 26 × 13 × 2 = 676, about 3.5 per square foot. To count yours, multiply the rows of boards by the number of joists, then by 2. With joists at 24 inches the same deck has 9 joists and needs 468 screws.

How much lumber do I need for a deck?

For the 16 × 12 ft example: 29 deck boards 16 ft long (457.6 linear feet including 10% waste) and 13 joists 12 ft long (156 linear feet), plus 676 screws. Beams, posts, rim joists, blocking and stairs are extra; the deck joist calculator sizes the joists and the stair calculator the stringers, so this page is the decking and joist lumber only.

Every answer above uses the formulas in how the numbers are calculated, so you can check it with your own sizes. For hidden clips, an allowance and box counts, use the deck screw calculator.

Sources

The counts are arithmetic. The spacings, waste rules and lumber sizes quoted on this page come from these publications. Follow them and your local building code over this page where they differ.

Every publication the site cites is listed on the methodology page, with how the numbers are computed and checked. Found a mistake? Send a correction. The About page explains who runs DeckTally.

More deck calculators

Last reviewed . Built and checked by Hassan Razeen.